Connection of the remote control unit

(AJ-RC10G)

It is possible to control some of the functions remotely by connecting the remote control unit AJ-RC10G (optional accessory).

When AJ-RC10G is connected to the REMOTE connector on the unit and the power switches of both of the unit and AJ-RC10G are turned on, the unit automatically enters the remote control mode.

The remote control mode is released when AJ-RC10G is removed or the power for the AJ-RC10G is turned OFF.

Switch functions in the remote control mode

In the remote control mode, the following switches and buttons on the unit are disabled.

zSHUTTER switch

zMENU button

zJOG dial button

zGAIN switch

zOUTPUT/AUTO KNEE switch

zWHITE BAL switch

zUSER MAIN button

zUSER 1 button

zUSER 2 button

Recording and playback Operations in the remote control mode

When the remote control is connected, recording and playback can be controlled through both the camera- recorder and the AJ-RC10G.

‹Notes

zThe state that was adjusted by connecting AJ-RC10G is stored in the unit. Not to store the adjusted state in the unit, open the FUNCTION MENU of AJ-RC10G to set the RC DATA SAVE item to “OFF”.

zWhen the dedicated cable is connected or removed, ensure that the POWER switches on both the main unit and AJ-RC10G are turned “OFF”.

Dedicated cable

AJ-RC10G

REMOTE connector

Preparation

Attaching the Front Audio Level Control Knob

If you use the Front Audio Level control frequently, attach the accessory knob so that it can be easily operated.

Front Audio

 

Knob

Level Control

 

(Accessory)

 

 

Screw

 

ÎMarks

(Accessory)

Screw

 

Remove the screw in the center of the Front Audio Level control, and attach the accessory knob using the screw (included). When attaching the knob, be sure to align the marks on the control with the marks on the knob.

Preparation：Connection of the remote control unit (AJ-RC10G) 107