Reconnection of Incomplete Clips

Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied to different cards. Reconnection function generates one clip (the original, connected clip) from incomplete clips.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Use the cursor and SET button to select incomplete clips to reconnect.

Usually, thumbnails of incomplete clips (clips with marker) are displayed in line.

3 Press the THUMBNAIL MENU button and select OPERATION > RE-CONNECTION from the thumbnail menu.

4 The confirmation window appears. Use the cursor buttons and SET button to select YES.

‹Note

indication stays illuminated until all the incomplete clips that comprise the original clip are reconnected.

Copying Clips

Selected clips can be copied to the P2 card or SD memory card in the desired slot.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Use the cursor buttons to move the pointer to the desired clip and press the SET button.

3 Press the THUMBNAIL MENU button and select OPERATION > COPY from the thumbnail menu. Select Slot 1-5 or SD memory card as the destination.

4 The confirmation window appears. Use the cursor buttons and SET button to select YES.

‹Notes

zDo not turn off the power or remove a P2 card while data is being copied. Doing so may cause the P2 card to fail. If you should accidentally perform one of the above operations, defective clips will be generated. Delete them, and then copy them again.

zWhen clips are copied to P2 cards, all the information on

the clips is copied. However, when they are copied to the SD memory card *1, video and sound information is not

copied, only thumbnails, clip metadata, icons, Voice Memo, proxy, and real-time metadata.

zWhen there is insufficient recording capacity on the destination, the message “LACK OF REC CAPACITY” is displayed, and copying will not proceed. When clips to be copied include some with defects, the message “CANNOT ACCESS” is displayed, and copying will not proceed. If selected clips include any that are already recorded on the destination P2 card, copying will not proceed.

zTo stop copying, press the SET button. Clips currently being copied to the destination will be deleted.

zWhen identical clips exist on the destination card, the “OVERWRITE?” is displayed. Select “YES” or “NO”.

*1 Regarding SD memory cards to be used, see <Cautions in using SD memory cards> (page 21).

118 Manipulating Clips with Thumbnails : Reconnection of Incomplete Clips