Preparation

Power Supply

A battery pack or an external DC power supply can be used as AJ-HPX2000’s power supply.

Using a Battery Pack

Battery packs from the following manufacturers can be used:

•Anton/Bauer

•IDX

•PACO

•Sony

The type of the battery can be checked or changed through the viewfinder or menu screen on the monitor.

zPressing the MODE CHECK button on the side of the camera-recorder displays the current type of the battery in the upper right corner of the viewfinder display.

zNavigate the menu to open the BATTERY/P2CARD screen from the MAIN OPERATION page. Then, through the BATTERY SELECT menu option, you can check and change the battery type.

#< BATTERY/P2CARD >

BATTERY SELECT

:DIONIC90

 

EXT DC IN SELECT

:AC-ADPT

BATT NEAR END ALARM :OFF

BATT NEAR END CANCEL:ON

BATT END ALARM

:ON

BATT REMAIN FULL

:70%

CARD NEAR END ALARM

:ON

CARD NEAR END TIME

:2min

CARD END ALARM

:ON

CARD REMAIN/„

:3min/„

‹Notes

zOther batteries may be used by changing the menu setting, but system compatibility is not guaranteed.

zCharge the battery pack with the battery charger before using it. (Please refer to the battery charger’s instruction manual for information about charging.)

Preparation

Preparation：Power Supply 97