Panasonic AJSPC700P manual 103

Chapter 8 Menu Description Tables (continued)

8-3-3 COLOR CORRECTION

	Items/				Adjustable	Remarks
Data Saved					Range
R					–63	Perform red color correction (saturation
(SAT/PHASE)					:	and hue).
					+00
					:
S	C	U	F	E	+63
R-	Mg				–63	Perform color correction (saturation and
(SAT/PHASE)					:	hue) between red and magenta.
					+00
					:
S	C	U	F	E	+63
Mg					–63	Perform magenta color correction
(SAT/PHASE)					:	(saturation and hue).
					+00
					:
S	C	U	F	E	+63
Mg	-B				–63	Perform color correction (saturation and
(SAT/PHASE)					:	hue) between magenta and blue.
					+00
					:
S	C	U	F	E	+63
B					–63	Perform blue color correction
(SAT/PHASE)					:	(saturation and hue).
					+00
					:
S	C	U	F	E	+63
B-Cy					–63	Perform color correction (saturation and
(SAT/PHASE)					:	hue) between blue and cyan.
					+00
					:
S	C	U	F	E	+63
Cy					–63	Perform cyan color correction
(SAT/PHASE)					:	(saturation and hue).
					+00
					:
S	C	U	F	E	+63
Cy-G					–63	Perform color correction (saturation and
(SAT/PHASE)					:	hue) between cyan and green.
					+00
					:
S	C	U	F	E	+63
G					–63	Perform green color correction
(SAT/PHASE)					:	(saturation, hue).
					+00
					:
S	C	U	F	E	+63
G-Yl					–63	Perform color correction (saturation,
(SAT/PHASE)					:	hue) between green and yellow.
					+00
					:
S	C	U	F	E	+63
Yl					–63	Perform yellow color correction
(SAT/PHASE)					:	(saturation, hue).
					+00
					:
S	C	U	F	E	+63
Yl-	R				–63	Perform color correction (saturation,
(SAT/PHASE)					:	hue) between yellow and red.
					+00
					:
S	C	U	F	E	+63
„	COLOR				ON	Select whether or not to enable color
CORRECT					OFF	correction for the selected GAIN switch
						(L/M/H).
						ON: Enable correction.
						OFF: Disable correction.
S	C	U	F	E

8-3-4 LOW SETTING

	Items/				Adjustable	Remarks
Data Saved					Range
„MASTER					–3dB	Select the master gain from –3, 0, 3, 6,
GAIN					:	9, 12, 15, 18, 21, 24, 27, or 30dB.
					0dB
					:
S	C	U	F	E	30dB
H.DTL LEVEL					00	Set H.DTL LEVEL.
					:
					17
					:
S	C	U	F	E	63
V.DTL LEVEL					00	Set V.DTL LEVEL.
					:
					18
					:
S	C	U	F	E	31
DTL	CORING				00	Set DTL CORING.
					:
					02
					:
S	C	U	F	E	15
							8
H.DTL FREQ.					00	Set a frequency (DTL width) at which
					:	H.DTL is added. The greater the value,
					20	the higher the frequency (the narrower
					:
						the DTL).
S	C	U	F	E	31
LEVEL					0	Set LEVEL DEPEND.
DEPEND.					1	No DTL is added to the portion whose
					:	brightness is the setting value or less.
					5	When the GAMMA MODE SEL item is
						set to STD1, each setting value
						represents brightness levels, as follows:
						0 = about 0%, 1 = about 4%,
						2 = about 8%, 3 = about 12%,
						4 = about 16%, 5 = about 20%.
S	C	U	F	E
MASTER					0.35	Set MASTER GAMMA in 0.01 steps.
GAMMA					:
					0.45
					:
S	C	U	F	E	0.75
BLACK					–3	Set the gamma curb for dark spots.
STRETCH					:
					OFF
					:
S	C	U	F	E	+3
„	MATRIX				OFF	Select the color correction table.
TABLE					A
					B
S	C	U	F	E
„	COLOR				ON	Set the color correction to ON or OFF.
CORRECT					OFF
S	C	U	F	E

<Note>

The items indicated by „ are the setting items for PAINT MENU SW(„) R/W in the <SD CARD R/W SELECT> screen. The items without „ are the setting items for PAINT MENU LEVEL R/W.

Please refer to [8-7-2 SD CARD R/W SELECT] for more information.

The ____ in the Adjustable Range column indicates the preset mode.

103