Chapter 4 Adjustments and Settings for Recording (continued)
To read data on an SD memory card
1Turn the JOG dial button to move the cursor to the option [SD CARD READ/WRITE]. Then, press the dial button.
To select a file number
2Turn the JOG dial button to move the cursor to the menu option [R. SELECT]. Then, press the dial button.
3Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.
To read data on a selected file
4Turn the JOG dial button to move the cursor to the option [READ].
5Press the JOG dial button to display the following message:
6Turn the JOG dial button to move the cursor to YES. Then, press the dial button.
When the data has been read, the following message appears:
4
The data will not be read if any of the following messages appears when the JOG dial button is pressed:
Error message | Remedy |
|
|
READ NG | Insert an SD memory card. |
NO CARD |
|
(No SD memory card inserted.) |
|
|
|
READ NG | The card has not been |
FORMAT ERROR | formatted using the AJ- |
(SD memory card not properly | SPC700P. |
formatted.) | Replace the card. |
|
|
READ NG | Write file data. |
NO FILE |
|
(No file found.) |
|
|
|
READ NG | Only data written with the AJ- |
ERROR | SPC700P is readable. |
(SD memory card not readable.) |
|
|
|
READ NG | Example: The SD memory card |
CANNOT ACCCESS | is not accessible because it is |
(SD memory card not | being played back. |
accessible.) | After the operation in process, |
| read data. |
|
|
7To exit the menu, press the MENU button.
The settings menu will be replaced by status indications for the
59