Chapter 4 Adjustments and Settings for Recording (continued)

4-10-4 How to Use Scene File Data

It is possible to write the settings data into the scene file area of the internal memory of the AJ-SPC700P, or to read data written in this area. Four types of scene files are available. This data allows you to quickly reproduce an optimum setup state.

TITLEs 1 - 4 are factory-assigned the defaults for the AJ- SPC700P.

To change the settings, go to the <SCENE> screen from the FILE page.

To write settings data for scene files

1Navigate the menu to the SCENE screen.

2Turn the JOG dial button to move the cursor to the SCENE SEL option.

3Press the JOG dial button to blink scene file numbers. Then, turn the dial button to select a desired scene file number.

7Turn the JOG dial button to move the cursor to YES. Then, press the dial button.

This writes the setting data into the scene file area of the AJ-SPC700P internal memory.

8To exit the menu, press the MENU button.

4

4Press the JOG dial button to accept the scene file.

5Turn the JOG dial button to return the cursor to the option WRITE.

6Press the JOG dial button to display the following message:

61