Chapter 3 Recording and Playback (continued)

3-3 Normal Recording

Pressing either the REC START/STOP button, REC button on the handle or VTR button at the lens starts recording of video and sound on the P2 card.

A cluster of data that consists of video and sound generated through a shooting action, together with such added information as a voice memo, is called a “clip”.

<Note>

Even if a P2 card has just been inserted, or the power has been just turned on, you can start recording using the internal memory of the AJ-SPC700P. In this case, recording cannot be stopped until the P2 card is recognised.

If the inserted card is not recognized as a recordable P2 card, the record in internal memory is instantly discarded, and the message “CANNOT REC” message is displayed on the viewfinder.

Press the MODE CHECK button to check P2 card status (displayed in viewfinder).

Rec start/stop button

Mode check button

These are the options for PRE REC TIME.

1-15 SEC (for DVCPRO 25M or DV)

1-8 SEC (for DVCPRO 50M):

Specify the duration for which data may be recorded before either the REC START/STOP button, REC button on the handle or VTR button at the lens is pressed.

<Notes>

z“P-REC” indication when the “PRE REC MODE” menu option is set to OFF

After recording is stopped, the “P-REC” indication remains displayed until all video and sound are recorded on the P2 card, even if the PRE REC MODE menu option is set to OFF. For more information about the “P-REC” indication, see “4-7-2 Viewfinder Status Indication Layout”.

zImmediately after the power is turned on, the menu option PRE REC TIME is selected and/or the storage duration is changed, the content in internal memory will be undefined. In these situations, the video or sound will not be recorded for the duration specified, even if either the REC START/ STOP button, REC button on the handle or VTR button at the lens is pressed to start recording.

zA P2 card that has been just inserted takes some time to recognise. In this situation, video or sound may not be recorded for the duration specified, even if either the REC START/STOP button, REC button on the handle, or VTR button at the lens is pressed to start a recording.

zThe internal memory does not store video or sound when a playback or recording review is being performed. For this reason, no video or sound can be recorded during such operation.

zWhen recording starts, the time code indication (TCG) may be shown as “HOLD” until the P2 card has been recognised.

zDuring recording of IEEE1394 input, PRE RECORDING is not available.

3-4 PRE-RECORDING function

The internal memory of your AJ-SPC700P is capable of storing several seconds of video and sound data coming from the camera. This capability can be used to record video and sound several seconds before either the REC START/ STOP button, REC button on the handle or VTR button at the lens is pressed to start recording.

To use this function, the menu option PRE REC MODE must be set to “ON”. The storage duration of the internal memory can be set from the menu option PRE REC TIME.

PRE REC MODE and PRE REC TIME menu options can be found in the REC FUNCTION screen on the SYSTEM SETTING page.

The function of the menu option PRE REC MODE may be assigned to a desired user button by using any one of the menu options USER MAIN SW, USER1 SW, or USER2 SW. These options can be found in the USER SW screen, which is accessible from the CAM OPERATION page.

 

 

REC start

REC/PAUSE

 

 

(Recording starts)

(Recording pauses)

Real-time video

 

 

 

 

 

 

 

 

 

 

 

 

 

A

 

B

 

 

 

C

Real-time sound

 

 

 

 

 

 

Specified PRE-REC

 

 

 

 

 

 

 

duration

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Content on P2 card

Previous clip

 

A

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

New clip

26