Chapter 2 Parts and their Functions

2-1 Power Supply and Accessory Mounting Section

2

POWER switch

Used to turn on/off the power.

Battery mount

A battery pack from Anton/Bauer is mounted here.

DC IN (external power input) socket (XLR, 4P)

This unit is connected to an external DC power supply.

BREAKER switch

When an excessive amount of current is fed through the video camera-recorder, due to any abnormal event, the breaker automatically turns off the power in order to protect the device.

After the interior of the video camera-recorder has been checked and/or repaired, this button must be depressed. If there is no unusual reaction, the unit can be powered- up.

Lens mount cap

To remove the cap, raise the lens lever. When the lens is not mounted, replace the cap.

Lens cable/microphone cable clamp

This clamp secures the lens and microphone cables.

Tripod mount

When you want to mount the AJ-SPC700P on a tripod, the optional tripod adapter (SHAN-TM700) is attached here.

LENS jack (12-pin)

The lens connection cord is connected here. For a detailed description of your lens, see the relevant manufacturer’s instruction manual.

Cable Clamp

This clamp secures cables for a video light and other accessories.

Shoulder strap fittings

The shoulder strap is attached here.

Light shoe

A video light or similar accessory can be attached here.

Lens mount (bayonet type)

The lens is attached here.

Lens lever

Lower this lever to lock the lens to the lens mount.

11