Panasonic AJSPC700P 58

Chapter 4 Adjustments and Settings for Recording (continued)

6Turn the JOG dial button until a desired character appears.

The characters that appear are switched in the following order:

7Press the JOG dial button to accept a desired character.

8Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 6 - 7 to set characters (up to eight characters).

To write data on a selected file

9When the title is set, turn the JOG dial button to move the cursor to [:].

10Press the JOG dial button to return the cursor to the option [TITLE:].

11 Turn the JOG dial button to move the cursor to the option [WRITE].

12Press the JOG dial button to display the following message:

The data will not be written if any of the following messages appears when the JOG dial button is pressed:

Error message	Remedy


WRITE NG	Insert an SD memory card.
NO CARD
(No SD memory card inserted.)

WRITE NG	The card has not been
FORMAT ERROR	formatted using the AJ-
(SD memory card not properly	SPC700P.
formatted.)	Replace the card.

WRITE NG	The card may be defective.
ERROR	Replace the card.
(SD memory card not writable.)

WRITE NG	Remove the card and disable
WRITE PROTECT	the protect.
(SD memory card write-
protected.)

WRITE NG	Example: The SD memory card
CANNOT ACCCESS	is not accessible because it is
(SD memory card not	being played back.
accessible).	After the operation in process,
	format the card.

WRITENG	The card is not writable because
CARD FULL	it has no free space. Delete
(SD memory card has no free	unwanted files or replace the
space.)	card with a new one.

13Turn the JOG dial button to move the cursor to YES. Then, press the dial button.

When the data has been written, the following message appears:

14To exit the menu, press the MENU button.

The settings menu disappears and the status of the AJ- SPC700P is indicated at the top and bottom of the viewfinder screen.