Chapter 4 Adjustments and Settings for Recording (continued)

 

 

Information Item

 

 

 

Indication

Status

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRE RECORDING

 

P-REC (blink)

Indicated while pre-recorded video and audio are being recorded on the P2

 

 

 

 

 

 

 

 

indication/

 

 

 

 

card. If the USER switch is set to perform the PRE REC function, either “P-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REC OFF” or the specified duration “1s - 8/15s” is displayed when the PRE

 

 

 

 

SD memory card

 

 

 

 

 

 

 

 

 

 

 

 

RECORDING mode is switched by pressing the USER switch.

 

 

 

 

remaining free space

 

 

 

If a video encoder card (AJ-YAX800G, optional accessory) is attached, the

 

 

 

 

 

[SD]

 

 

 

 

 

(when MODE CHECK

 

 

 

 

remaining free space on the SD Memory card will be displayed when the

 

 

 

 

 

__h __m

 

 

 

 

is being performed)

 

 

 

 

MODE CHECK button is pressed during proxy recording.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ID record indication

 

ID

The ID is set to be superimposed on the video from the camera.

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

Battery type

 

PRO14 - AC_ADPT

Battery type, selected through a menu option. “AC_ADPT” indicates when an

 

 

 

 

 

 

 

external DC power supply has been input.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery remaining

 

__._V

Battery remaining level in tenths of a volt

 

 

 

 

level/voltage

___%

Digital battery remaining level, as a percentage

 

 

 

 

 

 

 

 

 

EMP

Digital battery empty.

 

 

 

 

 

 

 

 

 

 

 

 

MAX

Digital battery fully charged.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Camera-recorder

 

REC

The indication stays illuminated during recording. This is displayed when the

 

 

 

 

REC indication

 

 

 

 

menu option REC TALLY of the SYSTEM MODE is set to “CHAR”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This can also be displayed during the recording using the AJ-SPC700P alone.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This is displayed when the menu option REC STATUS of the VF INDICATOR2

 

 

 

 

 

 

 

 

 

is set to “ON”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P2 card remaining

 

___min

The indication “___min” stays illuminated under normal conditions or blinks

 

 

 

 

free space

 

END

when the remaining level is near zero.

 

 

 

 

 

 

 

 

 

 

When the card space is used up, “END” comes on.

 

 

 

 

 

 

 

 

 

 

 

 

WP

The P2 card is write-protected.

 

 

 

 

 

 

LOOP

The camera-recorder is in LOOP REC mode. When loop recording cannot be

 

 

 

 

 

 

 

 

 

performed, for example because the P2 card has no free space, the indication

 

 

 

 

 

 

 

 

 

blinks.

 

 

 

 

 

 

INFO P2

P2 card being recognised.

 

 

 

 

 

_/_

 

Total free space/capacities of the P2 cards (when MODE CHECK is being

 

 

 

 

 

 

 

 

 

performed).

 

 

 

 

 

 

 

 

 

<Note>

 

 

 

 

 

 

 

 

 

When the menu option P2 CARD REMAIN is set to “ONE CARD”, the number

 

 

 

 

 

 

 

 

 

of the P2 card slot that contains the target card is indicated, together with the

 

 

 

 

 

 

 

 

 

remaining space.

 

 

 

 

 

 

 

 

 

For more information, see [P2 Card Remaining Free Space/capacity

 

 

 

 

 

 

 

 

 

Indication] (page 50).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P2 card remaining

 

[1]

___min

The number of the P2 card slot that contains the target card and the

 

 

 

 

free space (when

 

 

 

 

remaining free space (when MODE CHECK is being performed) are

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicated. In LOOP REC mode, the minimum guaranteed recording time is

 

 

 

 

MODE CHECK is

 

 

 

 

 

 

 

 

 

 

 

 

indicated. This indication also appears when the target P2 card has been

 

 

 

 

being performed)

 

 

 

 

switched with a user button.

 

 

 

 

 

 

 

 

 

The minimum guaranteed recording time refers to the sum, at the time loop

 

 

 

 

 

 

 

 

 

recording is stopped, of the remaining free space of available P2 cards,

 

 

 

 

 

 

 

 

 

except for the card with the largest remaining free space.

 

 

 

 

 

 

 

 

 

Example: If three P2 cards are available, with remaining space of eight

 

 

 

 

 

 

 

 

 

minutes, five minutes and two minutes respectively, then the

 

 

 

 

 

 

 

 

 

minimum guaranteed recording time is seven minutes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Super iris ON/super

 

S

Super iris ON.

 

 

 

 

black ON

 

B

Super black ON.

 

 

 

 

 

 

 

 

 

 

SB

Super iris and super black both ON.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color temperature

 

_._K

Color temperature assigned to A, B, and PRE of the WHITE BAL switch (this

 

 

 

 

 

 

 

 

 

is a value stored at AWB performance or a value set through the menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

option). The indication is not provided in ATW mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Shutter speed/mode

1/__._

Shutter speed set to SYNCHRO SCAN.

 

 

 

 

 

 

 

 

 

1/100 - 1/2000

Shutter speed fixed.

 

 

 

 

 

 

 

 

 

 

 

SUPER V

Shutter speed set to SUPER V (high vertical resolution mode).

 

 

 

 

 

 

 

 

 

 

 

 

49