Chapter 6 Manuipulating Clips with Thumbnails (continued)

6-7-3 Deleting Voice Memos

1Perform Steps 1 to 4 in the [6-7-1 Playing Back Voice Memos] section to select the voice memo in the clip.

2Move the pointer over the clip you want to delete, and press the MENU BAR button. The pointer moves to the menu bar.

3From the menu bar, select OPERATION  DELETE. YES and NO appear to confirm deletion. Use the cursor buttons and the SET button to select YES.

The voice memo is deleted.

6-8 Deleting Clips

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Use the cursor buttons to move the pointer over the clip you want to delete.

Press the SET button to select the clip.

3Press the MENU BAR button and select OPERATION  DELETE from the menu bar.

4The following screen appears. Use the cursor buttons and the SET button to select YES.

6-9 Restoring Clips

Restores clips that are defective as a result of sudden powering-down during recording, or removal of the P2 card being accessed.

<Note>

Only those clips with yellow corrupt clip markers can be restored. Delete the clips with red corrupt clip markers. If the clip cannot be deleted, format the P2 card.

During restoration of the clips, however, the defective-clip indicator may change from yellow to red, resulting in inability to restore the clips.

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Use the cursor buttons to move the pointer over the clip you want to restore (defective clips are indicated by corrupt clip marks).

Press the SET button to select the clip.

3Press the MENU BAR button, and select OPERATION REPAIR CLIP from the menu bar.

4The confirmation window appears. Use the cursor buttons and the SET button to select YES.

6-10 Reconnection of Incomplete Clips

5The clip is deleted. All selected clips (in blue-green frames) are deleted by this operation.

<Note>

Pressing the SET button stops the deletion operation in the middle.

Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied to different cards. Reconnection function generates one clip (the original, connected clip) from incomplete clips.

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Use the cursor and SET button to select incomplete

clips to reconnect.

Usually, thumbnails of incomplete clips (clips with marker) are displayed in line.

3Press the MENU BAR button and select OPERATION  RE-CONNECTION from the menu bar.

4The confirmation window appears. Use the cursor buttons and SET button to select YES.

<Note>

indication stays illuminated until all the incomplete clips that comprise the original clip are reconnected.

82