Chapter 2 Parts and their Functions (continued)

2-2 Audio (input) Function Section

MIC IN (microphone input) jack (XLR, 3-pin)

A microphone (optional accessory) is connected here. Power for the microphone comes from this jack.

A remote microphone may be connected. In this case, the power supply to the appropriate connector must be enabled through menu option FRONT MIC POWER or

REAR MIC POWER.

These options are found in the <MIC/AUDIO2> screen on the MAIN OPERATION page.

AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 recording level adjustment) controls

With the AUDIO SELECT CH1/CH2 switch positioned to [MAN], these controls can be used to adjust the recording levels for Audio Channels 1/2.

Note that the controls are designed to be locked. For adjustment, each control must be depressed while turning.

AUDIO SELECT CH1/CH2 (audio channel 1 & 2 automatic/manual level adjustment selector) switch

Use this switch to select recording level control mode for Audio Channels 1 and 2.

AUTO: Recording level automatically controlled.

MAN: Recording level manually controlled.

AUDIO IN (audio input selector) switch

Use this switch to select the signals recorded through Audio Channels 1 and 2.

FRONT: Signal from the microphone connected to the MIC IN jack is recorded.

W.L. (WIRELESS) :

Signal from the slot-in wireless receiver is recorded.

REAR: Signal from the audio device connected to the AUDIO IN CH1/CH2 connector is

recorded.

AUDIO IN CH1/CH2 (audio input channel 1 & 2) connectors (XLR, 3-pin)

Audio devices or a microphone may be connected here.

LINE/MIC/+48V (line input/mic input/mic input + 48V) selector switch

Used to select the audio signal input from the AUDIO IN CH1/CH2 connectors.

LINE: Audio signal line-input from the audio device is input.

MIC: Audio signal from a self-powered (active) microphone is input. (The main unit does not supply power to the remote microphone).

+48V: Audio signal from a passive microphone is input. (The unit supplies power to the remote microphone).

Wireless slot

A Unislot wireless receiver (optional accessory) may be attached here.

FRONT AUDIO LEVEL (audio recording level adjustment) control

This control adjusts the recording levels for Audio Channels 1 and 2. Level adjustment does not depend on the position of the AUDIO SELECT switch.

The control can be enabled or disabled through the menu options FRONT VR CH1 or FRONT VR CH2. These options can be found in the <MIC/AUDIO1> screen on the MAIN OPERATION page.

12