Chapter 6 Manuipulating Clips with Thumbnails (continued)
The clip’s properties and the P2 card’s status are displayed.
From the menu bar, select PROPERTY CLIP PROPERTY.
The following screen appears.
Clip Number
Thumbnail
Slip Information
Displays the number of markers and voice memos attached to the clip.
The 
mark appears if the clip is recorded on a write- protected P2 card.
Slot Number
Clip Information
Displays detailed information about the clip.
CLIP NAME:
Display clip names.
START TC:
The time code value at the start of the recording.
START UB:
The user bit value at the start of the recording. DATE: The date of the recording.
TIME The time at the start of the recording.
DURATION:
The time length of the clip.
CODEC: The recording format of the clip.
Clip Meta Data
Displays more detailed data about the clip. Use the cursor buttons to move the pointer, and press the SET button to check the detailed content. The underlined items are automatically set during shooting. For more information on displayed metadata, see
P2 Card Status Display Settings
Select PROPERTY CARD STATUS from the menu bar to set the desired indication mode (remaining free space or used memory capacity) for the P2 card status display.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the MENU BAR button. The pointer moves to the menu bar.
3From the menu bar, select PROPERTY PROPERTY SETUP.
The following screen appears. Select the P2 card status display settings from the P2 CARD CAP menu option.
REMAIN:
Show remaining free space on the P2 card as the P2 card status display.
USED:
Show used memory capacity on the P2 card as the P2 card status display.
88