Chapter 5 Preparation (continued)
Reading out the Lens File Data
1 Select the lens file No. to read out by following Steps 1 to 3 in the [Storing the Lens File Data] section.
2Turn the JOG Dial button to move the cursor to [READ:].
3Press the JOG Dial button and the following message appears.
Resetting Lens File Data to Factory Standard Settings
The lens file data can be reset to the standard setting values that were set when the camera was shipped from the factory. From the FILE page, open the <INITIALISE> screen.
1From the INITIALIZE screen, select [RESET LENS FILES].
4Turn the JOG Dial button to move the cursor to [YES]. Then, press the JOG Dial button.
[READ OK] will be displayed after the stored lens file data has been read out.
5Press the MENU button to exit the menu operation.
5
2When the JOG Dial button is pressed, the message shown below appears.
3Turn the JOG Dial button to move the cursor to [YES], then press the JOG Dial button.
[OK] is displayed, resetting the lens file data to the factory default values.
71