Chapter 4 Adjustments and Settings for Recording (continued)
4To format the SD memory card, turn the JOG dial button to move the cursor to YES. Then, press the dial button.
When the SD memory card has been formatted, the following message appears:
The card will not be formatted if the following message appears when the JOG dial button is pressed:
Error message | Remedy |
|
|
|
|
CONFIG NG | Insert an SD memory card. |
NO CARD |
|
(No SD memory card inserted.) |
|
|
|
CONFIG NG | The card may be defective. |
ERROR | Replace the card. |
(SD memory card cannot be |
|
formatted.) |
|
|
|
CONFIG NG | Remove the card and cancel the |
WRITE PROTECT | protect. |
(SD memory card is write- |
|
protected.) |
|
|
|
CONFIG NG | Example: The SD memory card |
CANNOT ACCCESS | is not accessible because it is |
(SD memory card not | being played back. |
accessible). | After the operation in process, |
| format the card. |
|
|
5To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ- SPC700P is indicated at the top and bottom of the viewfinder screen.
<Note>
If an SD memory card is inserted or removed with the <SD CARD READ/WRITE> screen open, the data title cannot be edited.
Move the cursor to the option TITLE READ and press the JOG dial button.
Edit the data title.
To write set data on an SD memory card
1Navigate the menu to the <SD CARD READ/WRITE> screen.
To select a file number
2Turn the JOG dial button to move the cursor to the option [W. SELECT]. Then, press the dial button.
4
3Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.
To give the selected file a title
4Turn the JOG dial button to move the cursor to the option [TITLE:].
5Press the JOG dial button. This moves the cursor to the entry area, putting the
57