Chapter 5 Preparation (continued)

5-7 Attaching the Shoulder Strap

5-9 Connecting the AJ-EC3P

 

Extension Controller

Shoulder Strap

Some functions can be remote-controlled when the AJ-

 

 

EC3P extension control unit (optional) is connected to the

 

camera.

 

When the AJ-EC3P is connected, the camera automatically

 

enters remote control mode after the power switches of both

 

the camera and the AJ-EC3P are turned ON.

Press to open the hook.

To detach the shoulder strap, first open the hooks, then detach the strap.

<Note>

Make sure that the shoulder strap is securely attached.

5-8 Attaching the Rain Cover

When using the SHAN-RC700 Rain Cover

Tighten the cord

Secure with the

surface fastener

Secure with the surface fastener

5

Controller Cable

AJ-

ECU Connector

AJ-EC3P

<Notes>

zBe sure to turn OFF both the camera and the AJ-EC3P power switches before connecting or disconnecting the controller cable.

zIf ECU DATA SAVE is set to OFF, the camera-related setting values, which have been adjusted or set using the AJ-EC3P, will be cancelled when the camera power switch is turned OFF. Also, the setting values cannot be written to an SD memory card. However, the menu settings performed using the AJ-EC3P can be written to an SD memory card. Next time the AJ-EC3P is connected, the setting values will return to the AJ-EC3P settings.

ECU DATA SAVE can be selected from the <SW MODE> screen on the CAM OPERATION page.

zIf ECU DATA SAVE is set to ON, the values adjusted or set using the AJ-EC3P are retained, even after the camera power switch is turned OFF.

zThe USER switch on the camera does not function when the AJ-EC3P is connected.

zWhen controlling the shutter from the AJ-EC3P, the shutter speeds correspond to the speeds set by the menu on the camera, not the speeds written on the AJ-EC3P. The shutter speeds correspond as follows:

AJ-EC3P

Camera Shutter Speeds

Shutter Speed Indication

100 (60)

POSITION1

120POSITION2

250POSITION3

500POSITION4

1000POSITION5

2000POSITION6

75