Chapter 4 Adjustments and Settings for Recording (continued)

4-9 Menu-driven Function Setup

Each function is set up using the menu system.

4-9-1 Setting the Switchover of USER SW GAIN

In addition to the standard L/M/H gain mode, the AJ- SPC700P supports an S.GAIN (super gain) mode with more than 30-dB gain-up.

To make use of this feature, you need to specify desired gains through the menu option S.GAIN.

The menu options can be found in the <USER SW GAIN> screen, which is accessible from the CAM OPERATION page.

_E

_E

4-9-2 Selecting Video Output Signals

You need to select the signals to be output from the VIDEO OUT connector.

Select the video output signal on the menu option VIDEO OUT SEL.

Use the menu option OUTPUT CHAR to select the character contents to be superimposed onto the video output.

These options can be found in the OUTPUT SEL screen, which is accessible from the SYSTEM SETTING page.

For more information, see [8-2-4 OUTPUT SEL].

Settings Options and Usage

S.GAIN: Gain-ups with _ marks enabled. Gain-ups without _ marks disabled.

4-9-3 Selecting Function for the FRONT AUDIO LEVEL Control

The FRONT AUDIO LEVEL control can be assigned the function of adjusting the recording level.

To specify whether or not the FRONT AUDIO LEVEL control is effective on the channels set to accept input signals, use the menu options FRONT VR CH1 and FRONT VR CH2. These options can be found in the <MIC/AUDIO1> screen, which is accessible from the MAIN OPERATION page.

For more information, see [8-6-4 MIC/AUDIO1].

54