Chapter 6 Manuipulating Clips with Thumbnails (continued)

Indicator for clips with proxy

This marker is displayed for clips with proxy attached.

Indicator for edit copy clips

This marker is displayed for clips whose edit copy operation was performed on the P2 deck. For more information on edit copy, see the AJ-SPD850 instruction manual.

6-3 Selecting Thumbnails

Multiple thumbnails can be randomly selected in the thumbnail screen.

6-4 Playing Back Clips

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Use the cursor buttons to move the pointer over the desired clip.

3Press the PLAY/PAUSE button, and the clip under the pointer will be played back on the LCD monitor.

After playback of the clip under the pointer, subsequent clips are played back in order, according to when they were shot. The thumbnail screen returns after the last clip has been played back.

1Use the cursor buttons to move the pointer (yellow frame) to the desired clip and press the SET button. The frame around the selected thumbnail changes to a blue frame. Press the SET button again to deselect the clip.

2Additional clips can be selected by repeating Step 1.

It is possible to display only the selected thumbnails in the thumbnail screen for playback. Please refer to [6-5 Switching the Thumbnail Display] for more information.

<Notes>

 

 

6

z When playing back clips, it is not

necessary

to

“select” the clips (blue frames

around

the

 

thumbnails).

 

 

 

zClips with clip numbers displayed in red cannot be played.

4During playback, pressing the REW button starts 4C speed reverse playback, and the FF button starts 4C speed fast playback. Press the PLAY/PAUSE button to return to normal playback.

5During clip playback, pressing the PLAY/PAUSE button will temporarily stop (pause) the process.

During a pause, pressing the REW button moves the pause position to the beginning of the clip. Pressing the REW button again moves the pause position to the beginning of the previous clip.

During a pause, pressing the FF button moves the pause position to the beginning of the next clip.

LCD Monitor

MENU BAR Button

6 Pressing the STOP button during clip playback stops

the playback and returns the display to the thumbnail

screen.

THUMBNAIL Button

CURSOR Buttons

SET Button

<Note>

When playback is stopped, the position of the pointer

remains on the clip that was being played back,

regardless of where the playback started. However,

when the THUMBNAIL button is pressed to close the

thumbnail screen, the pointer will move to the starting

clip (i.e., the clip with the earliest recording date and

time), not the clip on which the pointer was last

positioned.

79