Chapter 4 Adjustments and Settings for Recording (continued)

4-5-5 Providing an ID to the Camera

The camera ID is specified through the <CAMERA ID> screen.

The ID can include up to 10 alphanumeric characters, symbols, and/or spaces.

<Note>

When the settings menu is displayed, outputting color bar signals does not indicate the camera ID.

1Go to the <CAMERA ID> screen from the CAM OPERATION page.

2Turn the JOG dial button to move the cursor to options [ID1:] - [ID3:].

3Press the JOG dial button. The cursor moves to the ID entry area, allowing you to enter an ID.

4Turn the JOG dial button until a desired character appears. The characters that appear are switched in the following order:

Space:

†

Ð

 

Alphabetical characters:

A to Z

Ð

 

Numerals:

0 to 9

Ð

 

Symbols:

', >, <, /, -

5Press the JOG dial button to accept a desired character.

6Turn the JOG dial button to move cursor to the next digit (clockwise), and repeat Steps 4 - 5 to set characters.

7When all the characters are set, turn the JOG dial button to move the cursor to [:].

8Pressing the JOG dial button brings the cursor back to the options [ID1:] - [ID3:].

9To exit the menu, press the MENU button.

The settings menu disappears and the status of the AJ- SPC700P is indicated at the top and bottom of the viewfinder screen.

<Note>

When the menu option CAMERA ID is set to “BAR”, the camera ID is recorded together with color bar signals. This menu option is accessible from the <VF INDICATOR1> screen, which is accessible from the VF page.

4-5-6 Setting UMID Information

The AJ-SPC700P supports UMID metadata. You need to specify as UMID information the country where you live (using up to three characters), organisation or company (up to four characters) and user name (up to four characters). For the country name, you must use abbreviations prescribed in the ISO3166 Country Code*1.

Here are some examples of the correct method for specifying a user name:

*1 Examples: China

CHN

4

 

U.S.A.

USA

 

 

Canada

CAN

 

 

Japan

JPN

 

 

 

 

 

 

 

 

 

 

 

1Go to the <UMID SET/ INFO> screen from the MAIN OPERATION page.

2Turn the JOG dial button to move the cursor to the option [USER].

3Press the JOG dial button. The cursor moves to the user entry area, allowing you to enter a user name.

4Turn the JOG dial button until a desired character appears. The characters appear in the following order:

Space:

†

Ð

 

Alphabetical characters:

A to Z

Ð

 

Numerals:

0 to 9

Ð

 

Symbols:

', >, <, /, -

<Note>

The COUNTRY entry can only include alphabetical characters and spaces.

5Press the JOG dial button to accept a desired character.

6Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 4 to 5 to set characters.

7When the last character is set, press the JOG dial button to bring the cursor back to the option [USER].

8To exit the menu, press the MENU button.

41