Chapter 6 Manuipulating Clips with Thumbnails (continued)
Selected clips can be copied to the P2 card or SD memory card in the desired slot.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer to the desired clip and press the SET button.
3Press the MENU BAR button and select OPERATION COPY from the menu bar.
Select Slot
4The confirmation window appears. Use the cursor buttons and SET button to select YES.
<Notes>
zDo not turn the power off or remove or insert a card during copying. If you should accidentally perform one of the above operations, defective clips will be generated. Delete them, and then copy them again.
zWhen clips are copied to P2 cards, all the information on
the clips is copied. However, when they are copied to the SD memory card *1, video and sound information is not copied, only thumbnails, clip metadata, icons, Voice Memo, proxy, and
zWhen there is insufficient recording capacity on the destination, the message “LACK OF REC CAPACITY” is displayed, and copying will not proceed. When clips to be copied include some with defects, the message “CANNOT ACCESS” is displayed, and copying will not proceed. If
selected clips include any that are already recorded on the | 6 |
destination P2 card, copying will not proceed. |
zTo stop copying, press the SET button. Clips currently being copied to the destination will be deleted.
zWhen identical clips exist on the destination card, the “OVERWRITE?” is displayed. Select “YES” or “NO”.
*1: Regarding SD memory cards to be used, see <Cautions in using SD memory cards> (page 17).
Information such as the name of person who shot the video, the name of the reporter, the shooting location, or a text memo can be read from the SD memory card, and can be recorded as Clip Meta Data.
Reading Clip Meta Data (metadata upload)
1Insert the SD memory card that contains the Clip Meta Data (metadata upload file).
2Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
<Note>
When the thumbnail screen is displayed, simultaneously pressing the MODECHECK button and the MENU BAR button jumps to Step 5.
3Press the MENU BAR button. The cursor moves to the menu bar.
4Select OPERATION DEVICE SETUP META DATA LOAD from the menu bar, and press the SET button.
83