Panasonic KEY TELEPHONE manual Assigning and Deleting Names for PSD Numbers

2. Setting Up Your Phone

4.Press the MEMORY key.

5.Enter the SSD bin number that contains the first part of the number to be dialled. (If a pause is required, press the REDIAL key.)

6.Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be linked.

7.Press the HOLD key when you are finished.

8.Replace the handset or press the ON/OFF key.

To use a PSD key that links multiple speed dial numbers

1.If necessary, select the trunk group (9, 81-84) to access an outside line. (Normally the trunk is selected by the speed dial numbers.)

2.Press the PSD key.

Assigning and Deleting Names for PSD Numbers

After assigning a PSD number to a one-touch or soft key, you can assign a name to the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name when you are in the PSD Directory mode.

Note: You need to know the PSD bin number for PSD number in order to assign a name to it. To determine the bin number, see “Checking Speed Dial Numbers” on page 36.

To assign a name to a PSD number

Note: This task requires a display phone.

1.Pick up the handset or press the ON/OFF key.

2.Press the PROG key.

3.Press the * key.

4.Enter 0 for the Name Assignment mode.

5.Press the ▼ VOLUME ▲ key until the desired PSD bin number (80-99) is displayed.

6.Press the FL/R key to clear the current/default data.

7.(A) For a small-displayphone (see Figure 17 on page 28 for an example): a. Press the appropriate one-touch key for the desired group of letters.

26 Key Telephone User Guide