Panasonic NN-SD446, NN-SD466, NN-SD456 Maintenance of your oven, Service, Door Seals, Oven Light

Models: NN-SD456 NN-SD466 NN-SD446

1 65
Download 65 pages 40.67 Kb
Page 6
Image 6
Maintenance of your oven

Care & Cleaning of your Microwave Oven - IMPORTANT

It is essential for the safe operation of the oven that it is kept clean, and wiped out after each use. Failure to maintain the oven in a clean condition could lead to deterioration of a surface that could adversely affect the life of the appliance and possibly result in a hazardous situation.

1.Switch the oven off before cleaning and unplug at socket if possible.

2.Keep the inside of the oven, door seals and door seal areas clean. When food splatters or spilled liquids adhere to oven walls, door seals and door seal areas wipe off with a damp cloth. Mild detergent may be used if they get very dirty. The use of harsh detergents or abrasives is not recommended.

3.The outside oven surface should be cleaned with a damp cloth. To prevent damage to the operating parts inside the oven, water should not be allowed to seep into the ventilation openings.

4.If the Control Panel becomes dirty, clean with a soft, dry cloth. Do not use harsh detergents or abrasives on Control Panel. When cleaning the Control Panel, leave the oven door open to prevent the oven from accidentally turning on. After cleaning touch STOP/CANCEL Pad to clear display window.

5.If steam accumulates inside or around the outside of the oven

door, wipe with a soft cloth. This may occur when the microwave oven is operated under high humidity conditions and in no way indicates a malfunction of the unit or microwave leakage.

6.It is occasionally necessary to remove the glass turntable for cleaning. Wash the turntable in warm soapy water.

7.The roller ring and oven cavity floor should be cleaned regularly to avoid excessive noise. Simply wipe the bottom surface of the oven, particularly the turntable spindle and the area surrounding this, with mild detergent and hot water then dry with a clean cloth. The roller ring may be washed in mild soapy water. Cooking vapours collect during repeated use but in no way affect the bottom surface or the roller ring wheels. After removing the roller ring from the cavity floor for cleaning, be sure to replace it in the proper position.

8.A steam cleaner is not to be used for cleaning.

Maintenance of your oven

1.Service

WHEN YOUR OVEN REQUIRES SERVICING call your local Panasonic engineer (08705 357357 Customer Support). It is hazardous for anyone other than a competent person to carry

out any service or repair operation which involves the removal of a cover which gives protection against exposure to microwave energy.

2.Door Seals

Do not attempt to tamper with or make any adjustments or repairs to door, control panel housing, safety interlock switches or any other part of the oven. Do not remove outer panel from oven. The door seals and door seal areas should always be kept clean

– use a damp cloth.

N.B. The appliance should be inspected for damage to the door seals and door seal areas. If these areas are damaged the appliance should not be operated until it has been repaired by a service technician trained by the manufacturer.

3.Oven Light

The oven lamp must be replaced by a service technician trained by the manufacturer. DO NOT attempt to remove the outer casing from the oven.

4.Selected Spares and Accessories

These may be ordered direct; on line at www.panasonic.co.uk or by telephoning the Customer Care Centre 08705 357357. Most major credit and debit cards accepted. Ensure you quote the correct model number.

4

Page 6
Image 6
Panasonic NN-SD446, NN-SD466 Maintenance of your oven, Service, Door Seals, Oven Light, Selected Spares and Accessories