REMOTE SETUP of UNITS & CAMERAS
You can set up the system unit and the camera with the setup menu by this controller.
You can use the controller to set up system units and cam- eras.
This section describes the main remote setup procedures. Some of the descriptions may not be applicable if they refer to devices not equipped in your system.
■Camera Setup
1.Select the desired camera.
2.Press the CAM SETUP/CAM FUNCTION button for 2 seconds or more to access the Camera Setup menu. The CAM SETUP indicator lights up.
For further information on the default settings and operating procedures, refer to the Operating Instructions included with the individual units.
■ | System Unit Setup |
1. | Select the desired system unit compatible with PS • Data |
| mode. |
CAM SETUP
CAM FUNCTION
(Example of Camera Setup menu)
*** SET UP MENU ***
PRESET | 1* |
|
|
MAP | 15 | ||
HOME POSITION | |||
SELF RETURN | 10MIN | ||
AUTO MODE | AUTO PAN | ||
AUTO PAN KEY | SEQ | ||
DIGITAL FLIP | OFF | ||
LOCAL/REMOTE | LOCAL | ||
SPECIAL1 |
| ||
CAMERA |
| ||
RS485 SET UP |
| ||
2. Press the SETUP/FUNCTION button for more than 2 |
seconds. The SETUP indicator lights up. |
The Setup menu for the system unit appears on the |
monitor. |
|
|
|
| Example of Setup Menu for | ||||
| SETUP |
|
| |||||
|
| |||||||
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| COMMUNICATION |
|
|
|
|
|
|
|
| SYSTEM |
| |
FUNCTION |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
3.To complete the setup, press the SETUP/FUNCTION button for 2 seconds or more.
The SETUP indicator goes off.
Note: If you change the default baud rate or parity check, the system unit setup function is disabled.
Keys used for system unit setup
|
| UP |
|
L | R L | R | To move the cursor. |
DOWN
STILL
To select a parameter.
–+
CAM
To execute the parameter or enter a submenu
SET
MON
To return to the previous menu
ESC
3.Move the cursor with the numeric buttons 2 (Up) or 8 (Down), then select a parameter with the buttons 6 (Right) or 4 (Left).
MONCAM
ESC LOGOUT SET
4.Press the CAM/SET button to execute the parameter or enter a submenu.
MONCAM
ESC LOGOUT SET
5.To return to the previous menu, press the MON/ESC button.
6.Press the CAM SETUP/CAM FUNCTION button for 2 seconds or more to complete the camera setup.
35
