7.Move the cursor to [SPECIAL] on the Setup menu, and press numeric buttons 4 and 6 simultaneously for 2 seconds or more to display the special menu.
8.Move the cursor to [CAMERA RESET]* on the Setup menu, and press buttons 4, 5 and 6 simultaneously to reset all the functions to the defaults.
*The menu to reset the camera functions differs depend- ing on the camera:
[SPECIAL] for the
Notes:
•If camera setup is started using the buttons on the camera, all future operations for setup must be per- formed using the buttons on the camera.
If camera setup is started using the System Controller, all future operations for setup must be performed using the same controller.
•For further information, refer to the Operating Instructions for the selected camera.
Keys used for camera setup
■Camera Patrol Learning
There are two ways of setting up camera patrol learning. One is to use the camera setup menu and the other is to operate the camera.
Follow the procedures below to set up while operating the combination camera.
1.Select the desired system unit, monitor and combina- tion camera.
2.Press the PATROL PLAY/PATROL LEARN button while holding down the PROGRAM/CAM SETUP/CAM FUNCTION button.
PROGRAM | PATROL PLAY |
CAM SETUP
PATROL
LEARN
CAM FUNCTION
[LEARNING] appears on the monitor.
2 |
| 8 |
|
|
|
|
|
|
4 |
| 6 |
|
|
|
CAM
SET
MON
ESC
To move the cursor
To select a parameter
To execute the mode or enter a submenu
To return to the previous menu
LEARNING
3.Operate the camera using the following controls so that it traces a routine course most frequently patrolled. The learning is programmed for 30 seconds for later patrol play.
•Pan/Tilt (Joystick)
•Iris (Open/Close)
•Focus (Far/Near)
•Zoom (Tele/Wide)
•Preset Position
Note: The memorized parameters may differ somewhat depending on the camera type. Refer to the manual included with the camera.
4.To stop the learning, press the SEQUENCE/PATROL STOP button while holding down the PROGRAM/CAM SETUP/CAM FUNCTION button.
PROGRAMSEQUENCE
CAM SETUP
|
|
|
| PATROL |
|
|
|
| |
CAM FUNCTION | STOP | |||
| ||||
[LEARNING] disappears from the monitor.
36
