Panasonic WV-CU360C manual Alarm Operation, Alarm Reset, Alarm Recall

Item	Controller Operation		Note
Copy to DVD		SETUP
	SHIFT	FUNCTION
Copy Cancel		SETUP
	SHIFT	FUNCTION
DVD Copy Record Display		SETUP	Equal to EL-ZOOM
	SHIFT	FUNCTION

■Alarm Operation

When the WV-CU360C receives an alarm signal from a sys- tem unit, the alarm indicator on the controller blinks.

The alarm indicator changes from blinking to steady light when the alarm is automatically reset.

The camera number [---] appears in the camera section of the LED display.

2.To cancel alarm suspension, press the ALM SUSPEND button again.

ALM SUSPEND

Note: The alarm suspension is applied to all system units, not to a selected one.

●Alarm Reset

1.Press the ALM RESET/ALM RECALL button.

ALM RESET

ALM RECALL

The alarm indicator on the controller goes off.

Notes:

●Alarm Recall

The alarm event log is recalled and displayed on the moni- tor.

1.Select the desired system unit and monitor.

2.Press the ALM RESET/ALM RECALL button while the SHIFT indicator is lit. The ALM RECALL indicator lights up. The alarm log appears on the monitor.

• Alarm reset operations including auto reset are

applied to all system units, not to a selected one.

• Alarm reset mode differs depending on the system

unit connected to the WV-CU360C.

• Confirm that the SHIFT button is released.

●

SHIFT

ALM RESET

ALM RECALL

Alarm Suspension

The alarm suspension mode is activated or deactivated. Use this function when you do not want to be disturbed by alarm input as for example during setup operations.

1.Press the ALM SUSPEND button. The ALM SUSPEND indicator lights up.

Alarm input is ignored while the indicator is lit.

3.To cancel the alarm recall function, press the ALM RESET/ALM RECALL button while the SHIFT indicator is lit.

ALM SUSPEND

34