!0Home/Decrement button (HOME/–)
Moves the camera to the home position.
During the setup, this button is used to select the desired parameter in the setup menu.
!1Auto Focus button (AUTO FOCUS)
Activates the auto focus function when the specified camera with auto focus feature is selected.
!2Camera/Set button (CAM/SET)
CAM: Selects a camera. Enter a camera number with the numeric buttons, then press the CAM/SET but- ton.
SET: Executes the currently highlighted setting in the setup menu.
!3Numeric Buttons (0 - 9)
These buttons are used for numeric input into the sys- tem, such as the number of a camera you want to select.
!4Unit/Escape button (UNIT/ESC)
UNIT: Selects a
ESC: Escapes from the currently highlighted selection and return to the previous menu window in the setup.
!5Alternate button (ALT)
In combination with certain other buttons, activates spe- cial functions.
For example, in combination with the ALM SUSPEND,
!6Multiscreen Monitor button (MULTI SCREEN)
Selects the multiscreen monitor connected to the MUL- TISCREEN OUT connector of the Video Multiplexer. The indicator lights up when the multiscreen monitor is selected.
Note: When REC OUT of the Video Multiplexer is used as connector for the Multiscreen 2 Monitor, this but- ton alternately selects the Multiscreen or Multiscreen 2 Monitor.
The indicator blinks when the Multiscreen 2 monitor is selected.
!7Spot Monitor button (SPOT)
Selects the spot monitor connected to the SPOT OUT connector of the Video Multiplexer.
The indicator lights up when the spot monitor is select- ed.
!8Alarm Reset button (ALM RESET)
Cancels an active alarm.
Pressing this button while the alarm function is activat- ed will reset an alarm of the currently selected unit and return the system to the condition before the alarm function was activated.
Pressing it in combination with the ALT button will reset all alarms.
!9Sequence button (SEQUENCE)
Activates the sequence mode. In this mode, a series of camera pictures is displayed in succession on the mon- itor screen for the specified duration.
The indicator lights up when this mode is selected.
@0VTR (VCR)/Camera selection button (VTR/CAM)
Selects the camera picture or VTR (VCR) playback pic- ture for display on the multiscreen monitor.
The indicator lights up when the VTR (VCR) mode is selected.
Note: The above operation is not valid unless multi- screen monitor is selected using the MULTI- SCREEN button.
@1Alarm Suspend button (ALM SUSPEND)
Pressing this button for more than two (2) seconds sus- pends activation of the alarm without changing the cur- rent alarm mode setup.
The indicator lights up when the alarm suspension mode is selected.
@2Electronic Zoom button (EL - ZOOM)
Zooms the picture presently displayed on the multi- screen monitor.
@3Multiscreen Selection button (MULTI SELECT)
Selects the multiscreen pattern to be displayed on the multiscreen monitor while monitoring the camera pic- ture or VTR (VCR) playback picture.
Pressing this button repeatedly will switch the screen as
follows: |
|
|
|
Camera Picture: |
| ||
4 → | 7 → | 9 → | 10 → 13 → 16→ 4 screen segments |
VTR (VCR) Playback Picture: | |||
4 → | 9 → | 16→ | 4 screen segments |
@4Function button (FUNCTION)
Displays the VTR (VCR) playback picture with the cam- era pictures on the multiscreen monitor.
The indicator lights up when the combined mode is selected, and turns off when the playback picture is selected.
During the setup, this button is used to select the next page.
41
