Atmel SpW-10X user manual Pin Locations, SpaceWire Router, User Manual, Preliminary

SpW-10X	Ref.:	UoD_SpW-10X_
SpaceWire Router		UserManual
	Issue:	3.4
User Manual
	Date:	11th July 2008

4. PIN LOCATIONS

The SpaceWire router package is a 196 pin MQFPF package.
Type definition:
- 3V3		3.3 Volt power
- GND		Ground
- PIC		CMOS input
- PRD4		pull-down resistor (min.16kΩ, max. 80kΩ)
- PLL		PLL pins
- PFILVDSZP	..................	LVDS cold sparing input
- PFILVDSZPB		LVDS cold sparing input, negative input
- PFOLVDS33ZP		LVDS output 3.3V
- PFOLVDS33ZPB		LVDS output 3.3V, negative output
- PFOLVDSREFZ		LVDS reference
- PO44F		4x driving strength output (fast, minimum slew rate control)
- PO22F-tri		2x driving strength output with tristate (fast, minimum slew rate control)
Pin	Signal		Type	Description
1	VDDB		3V3	Power
2	CLK		PIC	System clock
3	RSTN		PIC	Reset
4	TestIOEn		PIC PRD4	Chip test pin
5	TestEn		PIC PRD4	Chip test pin
6	FEEDBDIV(0)		PIC PRD4	PLL divider bit 0 (LS)
7	VSSA1		GND	Ground
8	VDDA1		3V3	Power
9	FEEDBDIV(1)		PIC PRD4	PLL divider bit 1
10	FEEDBDIV(2)		PIC PRD4	PLL divider bit 2 (MS)
11	VSSB		GND	Ground
12	VDDPLL		PLL	PLL power
13	VCOBias		PLL	PLL VCO bias
14	LoopFilter		PLL	PLL loop filter
15	VSSPLL		PLL	PLL ground
16	VDDB		3V3	Power
17	DINPlus(1)		PFILVDSZP	SpW port 1 input data +
			Preliminary	25