Atmel SpW-10X ISSUE 2.4 TO ISSUE, ISSUE 2.3 TO ISSUE, ISSUE 2.2 TO ISSUE, SpaceWire Router

SpW-10X	Ref.:	UoD_SpW-10X_
SpaceWire Router		UserManual
	Issue:	3.4
User Manual
	Date:	11th July 2008

details throughout document.

Section added on Application Guidelines giving example circuit diagram and PCB layout guidelines.

Section added on anomalies and warnings.

Section added on Technical Support.

15.6 ISSUE 2.4 TO ISSUE 2.5

Section	Ref	Change
		Update document revision and redistribute
11.1		Change VCC to VDD.
11.2		Remove VCC

15.7 ISSUE 2.3 TO ISSUE 2.4

Section	Ref	Change
Title		Change from data sheet to user manual
Title		Add Atmel part number as a reference
3.2	External Ports	Add depth of external port FIFOs.
5.2	SpaceWire	Rename data strobe IOs so the naming is consistent in the
	Signals	document. Note pin names should map to pin names in the
		data-sheet therefore use Plus/Minus notation
5.7	Power,	Additional information on power pins and PLL power supply
	Ground, PLL	circuitry.
	and LVDS
	Signals
10.3	Group Adaptive	Add mapping of SpaceWire Ports 1 to 8 and External ports 9
	Routing Table	and 10 to the physical interface to the device. Reference to
		section 4, pin locations added.
All		Move switching and electrical characteristics to end of
		document

15.8 ISSUE 2.2 TO ISSUE 2.3

Section	Ref	Change
		SpaceWire pins are ordered 0 to 7
		Missing figures updated

Preliminary 153