Panasonic WV-CU360C manual Setup Procedures For WJ-FS616/FS616C, Prior to Setup

SETUP PROCEDURES (For WJ-FS616/FS616C)

To display the setup menus for the WV-CU360C System Controller on the LED display, set the MODE switch and power up the controller as described below.

■Prior to Setup

Do the following before entering the setup mode.

■Buttons and Controls used for Setup

The following buttons and joystick operations are used for setup.

1.Confirm that all necessary connections and switch set- tings are complete.

2.With the power turned off, move bit #6 of the MODE switch on the rear to ON (administrator) position.

3.Supply power to the controller.

4.Turn on the power of cameras and other system units.

5.The LCD displays [SEtUP]. The controller is ready to enter the setup mode.

When setup is completed, restore the switch to its original position.

1.With the power turned off, move bit #6 of the MODE switch on the rear to OFF (operator) position.

2.Supply power to the controller.

0 9

CAM

SET

UNIT

ESC

LR

DOWN

UP

L R

UP

R or

	DOWN
	UP
L	R	or
	DOWN

Numeric buttons: To select a parameter

CAM/SET button: To execute modes and parameters

To enter a submenu

UNIT/ESC button: To return to the previous

menu

Up: To select a setup menu

Down: To select a setup menu

HOME/-

Left: To decrease the parameter

AUX 1

AUTO/+

Right: To increase the parameter

AUX 2

46