OPERATING PROCEDURES (For WJ-FS616/FS616C System)
Note: For common operations to the controller and the
■Camera Selection
One of the cameras connected to the system unit is select- ed.
1.Enter a camera number using the numeric buttons. The number appears on the LED display.
2.Press the CAM/SET button.
CAM
SET
UNITCAM
ESCSET
Note:
The following functions of the camera are controlled.
•Pan/tilt
•Focus
•Zoom
•Iris
•Defroster ON/OFF (camera housing)
•Wiper ON/OFF (camera housing)
•Preset Position (Combination Camera)
•Home position (Combination Camera)
•Auto pan (Combination Camera)
■Camera Control
Cameras and their peripherals are controlled from the WV- CU360C as follows. Some of the descriptions may not be applicable if they refer to devices not equipped in your sys- tem.
●Pan/Tilt Control
Proceed as follows to control an ordinary camera mounted on a pan/tilt head or a combination camera in manual or automatic panning mode.
1.Move the pan/tilt head in the desired direction with the joystick controller.
UP
LR
DOWN
2.Press the AUTO/+ button to activate a preset auto pan- ning.
●AUX Control
This allows you to control an auxiliary device such as a buzzer or lamp connected to the Receiver or combination camera.
8Auxiliary 1/2
1.Press the ALT button to turn on the ALT indicator .
The following additional functions can be controlled when using the
• Switching between color and B/W picture |
(Combination Camera) |
ALT
AUTO/+
AUX 2
• Patrol Learn function (Combination Camera) |
• Camera functions (Combination Camera) |
HOME/-
AUX 1
2.Press the AUX 1 or AUX 2 button to operate or cancel the auxiliary function for the selected camera.
49
