Panasonic WV-CU360C Pan/Tilt Control Auto/Random Panning, Camera Housing Control, Wiper control

■Pan/Tilt Control (Auto/Random Panning)

1.Select the desired monitor and camera.

2.Type 1 using the numeric button, then press the PAN button to toggle the Auto Panning function on the selected camera On and Off.

3.Type 2 using the numeric button, then press the PAN button to toggle the Random Panning function on the selected camera On and Off.

●Defroster Control

1.Select the desired monitor and camera.

2.Type 4 using the numeric button, then press the AUX button to toggle the power of the Defroster on the selected camera On and Off.

1		2		3
4		5		6	AUX
7	8		9

1

4

7

MON

ESC

2

5

8

0

3

6

9

CAM

SET

PAN

MON		CAM
	0
ESC		SET

●Auxiliary Control

The following function is available only when the WV-RC100 or WV-RC150 Receiver is included in the system.

Note: Moving the Joystick Control will stop Auto or Random panning.

■Camera Housing Control

●Wiper control

1.Select the desired monitor and camera.

2.Type 3 using the numeric button, then press the AUX button to toggle the power of the Wiper on the selected camera On and Off.

1	2	3
4	5	6	AUX
7	8	9

MONCAM

0

ESCSET

Note: To prevent premature wearing of the wiper blades, be sure to turn off the wiper when it is not needed or before selecting another camera for viewing.

1.Select the desired monitor and camera.

2.Type 1 using the numeric button, then press the AUX button to toggle the user Auxiliary Switch 1 of the Receiver On and Off.

3.Type 2 using the numeric button, then press the AUX button to toggle the user Auxiliary Switch 2 of the Receiver On and Off.

1	2	3
4	5	6	AUX
7	8	9
MON		CAM
	0
ESC		SET

63