Pelco 9770 CC1 port 6 and next consecutive ports, as, the hot switch. These connections do not

Table D. Data Connections—Single Node, Hot-Switched System

	CC1 port 6 and next consecutive ports, as
MXB connection(s)	necessary—connected through the hot
	switch.
Hot Switch connection	CC1 port 5.
	Any available port(s)— connected through
Other peripherals	the hot switch. These connections do not
	have to be in sequential ports.

Table E. Data Connections—Networked, Hot-Switched System

	CC1 port 7 and next consecutive ports, as
MXB connection(s)	necessary—connected through the hot
	switch.
NIU connection	CC1 port 6—connected through the hot
	switch.
Hot Switch connection	CC1 port 5.
	Any available port(s)— connected through
Other peripherals	the hot switch. These connections do not
	have to be in sequential ports.

NOTE: If you expand the number of matrix bay units in your system, you may need to change your port connections to connect each matrix bay to the lowest sequential port possible. Refer to the How to Expand Your System section in the Appendix for more information.

32 C1555M-G (12/07)