MONITOR OUTPUT CARD (CM9770-VMC) DETAIL

DIP SWITCH

GREEN

AMBER

 

 

Figure 40. CM9770-VMC Card

 

 

Table I. Monitor Output Card (CM9770-VMC) LEDs

 

 

 

Front Panel Label

Color

When LED is on or blinking

 

 

 

+

Green

The +5 VDC power source is functioning properly.

 

 

 

-

Green

The -5 VDC power source is functioning properly.

 

 

 

 

 

The CPU is active; this “heartbeat” LED blinks at a different rate, according to the current activity:

 

 

Primary VMC—0.25 Second: Downloading

 

 

The primary VMC card blinks at a quarter-second rate while updated software is downloading from a PC connected to

 

 

the RS-232 COM port on the rear panel.

HB

Amber

Secondary VMC—0.25 Second: Receiving

The secondary VMC card blinks at a quarter-second rate when it is receiving files from the primary VMC card.

 

 

 

 

0.5 Second: Boot ROM

 

 

The primary and secondary VMC cards blink at a half-second rate when in normal boot ROM mode.

 

 

1.0 Second: Normal Operation

 

 

The primary and secondary VMC cards blink at a one-second rate during normal operation.

 

 

 

RX

Amber

Blinks when communication is active between the MXB and either the CC1 or a PC (through the RS-232 COM port; for

system software upgrade).

 

 

 

 

 

MP

Amber

Blinks when communication is active between the primary VMC card and the other cards (secondary VMC card and

VCC cards). This communication occurs during normal system operation, as switching commands are sent and polled.

 

 

 

 

 

FP

Amber

Blinks once to indicate that the characters have been enabled for monitor display. This is the third initialization step.

 

 

 

CP

Amber

Blinks once to indicate that the CPU support chip has been configured. This is the second initialization step.

 

 

 

BP

Amber

Turns on during the boot sequence (the first initialization step), and turns off when initialization is complete.

 

 

 

C1555M-G (12/07)

49

Page 49
Image 49
Pelco manual Monitor Output Card CM9770-VMC Detail, Color When LED is on or blinking