Pelco 9770 manual Models, Controller and CPU Components, Matrix Bay, Network Interface Unit

MODELS

Controller and CPU Components

CM9700-CC1	CPU controller; 120 VAC, 60 Hz or 230 VAC, 50 Hz.
CM9700-SER	Serial communication card (RS-422 SERCOM); provides 8 communications ports to interface peripheral equipment
	(4 maximum per CPU).
CM9700-SER-32	Port expansion unit; 32 serial communication (SERCOM) ports per unit. Up to three units can be added to a CC1.
	(Check with Pelco Systems Applications Department before adding to an existing CM9700-CC1). Includes
	interconnecting cables and adapters for DB9 and RJ-45 connectors. Data interface can be RS-232 or RS-422.

NOTES ON USING THE SYSTEM CPU:

•You can use CM9760-CC1/CM9760-NW1 CPUs with the System 9770 if the CPU has been updated with software version level 9.01.XXX (note that at this software level the first three digits—9.01 in this case—must be at the same version level in the CPU (CC1 and NW1) and in the MGR software; the remaining three digits, such as .001 in version level 9.01.001, can vary).

•Note, however, that software version level 9.01 requires a minimum of 16 MB of RAM in the CPU. If necessary, you can upgrade the RAM in a CM9760-CC1 using the software upgrade kit appropriate for your CPU. Contact Pelco Technical Support at 1-800-289-9100 or 1-559-292-1981 for additional information.

Matrix Bay

CM9770-MXB CM9700-MPS CM9770-DFC CM9770-DFL CM9770-VCC

CM9770-RPC CM9770-VMC CM9770-RPM

CM9700-VPP CM9700-VPP-RK

Video matrix bay equipped with one CM9700-MPS power supply; 100-240 VAC, 50/60 Hz, autoranging.

Matrix bay power supply (spare); 120 VAC, 60 Hz or 230 VAC, 50Hz.

Downframe card and cable assembly; connects multiple matrix bays for expansion purposes.

Downframe card and cable assembly with BNC connectors for looping video.

Video camera card capable of accepting up to 32 camera inputs; also requires a rear panel card (CM9770-DFC, CM9770-DFL, or CM9770-RPC).

Rear panel video card; provides 32 BNC connectors used to connect camera inputs to matrix bay.

Video monitor card providing 16 monitor outputs; requires CM9770-RPM.

Rear panel monitor card; provides 16 BNCs to connect monitor outputs to matrix bay; also interfaces video output signals from video output card.

Video patch panel; provides 32 BNC connections for looping video out of system.

Optional rack mount designed to hold up to 16 CM9700-VPP patch panels.

Network Interface Unit

CM9700-NW1 Network interface unit; network CPU and software necessary for joining two or more independent systems together.

C1555M-G (12/07) 7