DISPLAY THE CM9770-MXB SOFTWARE VERSION LEVEL

To display the software version level on a system monitor, complete the following steps:

1.Enter the monitor number, and then press the MON key.

2.Enter 999997, and then press the CAM key. The software version number appears on the monitor.

DISPLAY A BLUE RASTER SCREEN

To display a blue raster screen on a system monitor, complete the following steps:

1.Enter the monitor number, and then press the MON key.

2.Enter 999999, and then press the CAM key. A blue raster screen appears on the monitor.

MONITOR COLOR ADJUSTMENT

Once you have connected all devices and powered the system, you can use the System 9770 color bars as a reference tool for adjusting the color on each monitor.

1.Enter the monitor number, and then press the MON key.

2.Enter 999998, and then press the CAM key. Broadcast quality color bars appear on the monitor.

3.Adjust color on each monitor as necessary until the color bars match the following color order on the monitor (for black and white monitors you can use the color bars to adjust brightness).

WHITE

YELLOW

CYAN (LIGHT BLUE)

GREEN

MAGENTA (LIGHT PURPLE)

RED

BLUE

BLACK

Figure 26. System 9770 Color Bars

NOTE: You can also set DIP switches 5 and 6 on the monitor output card to display color bars. Refer to the Monitor Output Card (CM9770-VMC) Detail section in the Appendix.

36

C1555M-G (12/07)

Page 36
Image 36
Pelco manual Display the CM9770-MXB Software Version Level, Display a Blue Raster Screen, Monitor Color Adjustment