Pelco C2602M-a ALARM MENU

C2602M-A (6/06) 19

ALARM MENU

Figure 16. Alarm Menu

Use the Alarm menu to set up alarms and relays for cameras.

•Alarm Input Setup: Use this option to connect or disconnect alarms for any camera at any time. If you connect an alarm, you must

associate it with a camera and select the alarm type - normally closed (N/C) or normally open (N/O).

•Relay Output Setup: Use this option to set up a relay in response to alarms. For each alarm, you can enable or disable the relay, select

whether the relay mode is latched or transparent, and set the delay time.

A latched relay continues operating for the duration set for it even if an alarm is received but the alarm sensor stops working. A transparent

relay stops working if the alarm sensor stops working after it receives an alarm.

Duration refers to either the delay between the occurrence of an alarm and the time at which a relay starts or the length of time that the

relay remains in effect after the alarm occurs. Duration times can be increased by 5- or 10-second increments for the ﬁrst minute, and then

by one- or two-minute increments for a maximum of ﬁve minutes. Duration may also be set to continue until an operator responds and turns

off the alarm with a key (Until Key-In).

•Relay Type: Use this option to indicate whether a relay is normally open (N/O) or normally closed (N/C).

Contents

Main Contents Page List of Illustrations List of Tables Description Features MODELS Overview of the System DX4000 DX4000 Controls CONTROLS ON THE FRONT PANEL OF THE DX4000 VIDEO CONTROL BUTTONS ON THE FRONT PANEL OF THE DX4000 OPERATING THE DX4000 FROM THE REMOTE CONTROL Before You Begin To start the DX4000 STARTING AND STOPPING THE DX4000 CHOOSING A USER ACCOUNT Main Window Overview CHANGING THE DISPLAY MODE CHANGING THE INFORMATION DISPLAYED ON THE MONITOR To change the screen sequencing mode ADJUSTING MENU SETTINGS DISPLAY MENU RECORD MENU CAMERA MENU AUDIO MENU ALARM MENU SYSTEM MENU BACK UP MENU CHANGING PASSWORDS RESETTING PASSWORDS To reset the passwords FACTORY DEFAULT SETTINGS Changing the Screen Layout SCREEN ROTATION MODE SCREEN VIEW SELECTION Controlling Cameras from the DX4000 PAN, TILT AND ZOOM CONTROLS ADJUSTING THE FOCUS OR IRIS ON A CAMERA WORKING WITH PRESETS To create a preset To run a preset To run a predened preset Using Preset 95 WORKING WITH PATTERNS To set up a pattern To run a pattern MODIFYING CAMERA SETTINGS To modify camera settings Page MODIFYING AUDIO SETTINGS To modify audio recording settings To modify live audio settings MODIFYING IMAGE RECORDING SETTINGS To modify image recording settings MODIFYING ALARMS AND RELAYS To modify alarm inputs To modify relay outputs Creating Recording Schedules SETTING UP A RECORDING SCHEDULE Page Page Page SETTING UP ALARM-BASED RECORDING Page Monitoring Live Video To change the screen mode To view a specic video channel in single mode Working With Recorded Video SEARCHING FOR VIDEO Page Page PLAYING RECORDED VIDEO BACKING UP VIDEO To back up video Page Working With the Remote Agent Application ABOUT THE REMOTE AGENT OVERVIEW OF THE MAIN SCREEN REMOTE AGENT CONTROL BUTTONS STARTING AND STOPPING THE REMOTE AGENT To start the remote agent To stop the remote agent CONFIGURING THE REMOTE AGENT To create a network connection for the DX4000 To congure optional settings on the remote agent CONFIGURING THE DX4000 FROM THE REMOTE AGENT RECORDING SETTINGS To set up recording quality To set up recording schedules To set up alarm recording To set up motion detection Page CAMERA SETTINGS To congure cameras AUDIO SETTINGS To set up audio recording To set up live audio ALARM SETTINGS To set up alarm inputs and relay outputs SYSTEM SETTINGS To review system information To congure buzzer sounds To modify passwords To congure the disk write mode To disconnect remote agent connections To set the network speed CONTROLLING CAMERAS FROM THE REMOTE AGENT To control PTZ cameras To adjust the focus MONITORING LIVE VIDEO FROM THE REMOTE AGENT CONTROLLING AUDIO To listen to or disable audio CAPTURING LIVE VIDEO FROM THE REMOTE CLIENT WORKING WITH RECORDED VIDEO ON THE REMOTE AGENT SEARCHING FOR RECORDED VIDEO Page Page BACKING UP VIDEO To back up video To save a snapshot To print a snapshot VIEWING VIDEO WITH THE BACKUP PLAYER To view recorded video with the backup player To authenticate recorded video with the backup player About the Web Client STARTING THE WEB CLIENT Page PRODUCT WARRANTY AND RETURN INFORMATION REVISION HISTORY