Factory Default Settings | Pelco C2602M-a guide

FACTORY DEFAULT SETTINGS

You can restore the DX4000 to its original factory settings. Restoring the unit to its original factory settings resets all settings. It does not erase any recorded video from the hard disk drive, nor does it reformat the drive.

1.Press the Menu button on the front panel of the DX4000 or on the remote control.

2.From the main menu, navigate to the System menu, and then select Factory Default. The Factory Default menu appears.

Figure 21. Factory Default Menu

3.Press the Enter button and a warning message appears on the screen. You can select OK and then press the Enter button to reset the unit to its original factory settings. If you do not want to restore the settings, select Cancel, and then press the Enter button to keep the current settings.

Figure 22. Factory Default Reset Warning Message

24	C2602M-A (6/06)

Image 24

Pelco C2602M-a manual Factory Default Settings, Factory Default Reset Warning Message

Contents

DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Illustrations List of Tables Description Features Models Connecting Devices to the DX4000 Overview of the System DX4000 Controls Controls on the Front Panel of the DX4000 Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front Panel Operating the DX4000 from the Remote Control Before You Begin Starting and Stopping the DX4000To start the DX4000 Table A. User Accounts and Access Levels All manager and operator accessChoosing a User Account To stop the DX4000 Main Window Overview Changing the Display Mode To change the screen sequencing modeChanging the Information Displayed on the Monitor Adjusting Menu Settings Display Menu Record Menu Camera Menu Audio Menu Alarm Menu Use the Alarm menu to set up alarms and relays for cameras System Menu System Menu Backup Menu Back UP Menu Changing Passwords Password Menu Resetting Passwords To reset the passwords Factory Default Settings Factory Default Reset Warning Message Screen Rotation Mode Changing the Screen LayoutScreen View Selection Adjusting the Focus or Iris on a Camera Controlling Cameras from the DX4000PAN, Tilt and Zoom Controls Working with Presets To create a presetTo run a preset To run a predeﬁned preset Using Preset To set up a patternWorking with Patterns Modifying Camera Settings To modify camera settingsTo run a pattern C2602M-A 6/06 Modifying Audio Settings To modify audio recording settings To modify live audio settings Modifying Image Recording Settings To modify image recording settings Modifying Alarms and Relays To modify alarm inputs To modify relay outputs Setting UP a Recording Schedule Creating Recording Schedules C2602M-A 6/06 Setting UP Motion Detection Recording Motion Detection Setup Menu C2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 To change the screen mode To view a speciﬁc video channel in single modeMonitoring Live Video Working With Recorded Video Searching for Video Timeline Showing Available Recorded Video C2602M-A 6/06 Playing Recorded Video Backing UP VideoTo back up video Missing Media Warning Message Working With the Remote Agent Application About the Remote AgentOverview of the Main Screen Remote Agent Control Buttons Starting and Stopping the Remote AgentTo start the remote agent To stop the remote agent Configuring the Remote Agent To create a network connection for the DX4000 Configuring the DX4000 from the Remote Agent To conﬁgure optional settings on the remote agent Recording Settings To set up recording quality To set up recording schedules Timer Recording Setup Screen To set up alarm recording To set up motion detection C2602M-A 6/06 Camera Settings To conﬁgure cameras Audio Settings To set up audio recording Alarm Settings To set up live audio System Settings To set up alarm inputs and relay outputs To modify passwords To review system informationTo conﬁgure buzzer sounds To conﬁgure the disk write mode To disconnect remote agent connectionsTo set the network speed To adjust the focus Controlling Cameras from the Remote AgentTo control PTZ cameras To listen to or disable audio Monitoring Live Video from the Remote AgentCapturing Live Video from the Remote Client Controlling Audio Working with Recorded Video on the Remote Agent Searching for Recorded VideoUse the following buttons to review the recorded video To search by date or time Click the Log button . The Search Log screen appears To search by event Event Viewer Screen Remote Agent Backup Screen Backing UP Video To save a snapshot To print a snapshotSave as... dialog box appears Print screen appears Viewing Video with the Backup Player To view recorded video with the backup player To authenticate recorded video with the backup playerClick the Open ﬁle button. The following screen appears About the Web Client Starting the WEB Client Click the Connect button . The Login dialog box appears Monitoring Video with the Web Client Product Warranty and Return Information ISO9001