Operator Functions • 3
Running a Job
Selecting a Job
This section assumes the job to be run has already been created by a Supervisor. If the job has not been created, refer to Create Job on page
When the machine is turned ON, a ‘Startup Screen’ showing details of your machine and contact details will be displayed for a short time.
After a few seconds, the Home Screen will appear. The last Job Definition selected will be loaded, with the message ‘Trial Piece Required’ displayed at the top of the screen.
If the job loaded is not the one required, press the Select Job Screen Key. A list of Job Definitions that have been created will appear alphabetically on the screen. Then...
•If you are certain which job you want, press the Screen Key alongside the desired job to select it immediately.
•If you need confirmation of the job details, use the ▲ and ▼ keys to scroll through the list. As each job is highlighted, the Mail Piece Icon Tree and Job Comments (if entered) will change to reflect the highlighted job. When you are certain which job you want, press the corresponding Screen Key to select it.
TIP: In either case, if the job you require is not on the first screen, use the ◄ and ► keys to move to the screen containing the required job.
The selected job’s Mail Piece Icon Tree will now be displayed. This shows the job
TIP: Once a job is selected, you can use the ▲ and ▼ keys to scroll through the icons on the Mail Piece Icon Tree. As each icon is highlighted, loading instructions related to the particular item will be displayed.
SV40221 Rev. A |
