Pitney Bowes D1600 Create Job, What is it?, Where is it?, Action…, Select Supervisor Functions

Supervisor Functions • 4

Create Job

What is it?

This function allows a Supervisor to create new Job Definitions to be stored within the machine’s memory for easy access by an Operator. The machine can store a maximum of 20 Job Definitions.

Where is it?

From the Home Screen...

select Menu

select Supervisor Functions

enter the Supervisor Access Code (see page 4-2) select Create Job

Action…

The machine will ask you a number of specific easy to answer questions about the make up of the finished Mail Piece in order to create the Job Definition.

Some of the questions asked will be based on the answers previously given and so the sequence will vary from job to job. As you create the job, the Mail Piece Icon Tree will be built on the left side of the display. This shows how to load material into each feeder.

Once the job is created, named and any comments entered, you must select Save to store it in the machine’s memory.

TIPS:

Placing a job description in the job comments will make it easy for an Operator to select the correct job.

Use the Batch Counter if you want to automatically process a pre-defined number of Mail Pieces. When the Batch Count is complete, the machine will stop, allowing the Operator to empty the stacker. Pressing Start will commence processing of the next batch.

If you are using OMR within a job, an OMR code must be pre-programmed into the machine’s memory. For details of programming OMR codes, refer to Chapter 5.

OMR jobs cannot utilise linked feeders.

SV40221 Rev. A 4-3