Pitney Bowes D1600, D1500 manual Reference

	Reference • 7
Envelope tray capacity:	Up to a maximum of 300, 26 lb.
	(90g/m2 ) envelopes
End Clearance:	End clearance between the Insert
	and envelope is a minimum of
	1/4" (6mm) at each side (i.e., a
	minimum of 1/2" [12mm] overall).
	This measurement should be taken
	with all Mail Piece contents placed
	into the envelope.
Depth Clearance:	The Mail Piece Contents must allow
	a minimum clearance of 1/8" (3mm)
	for unfolded inserts, and 1/4" (6mm
	for folded material, below the flap
	crease after being fully inserted
	into the envelope.

Envelope flap and throat requirements:

Min 1" (25.5mm)		3/4" (19mm)
Max 2-1/2" (63mm)
	Min 1/4" (6mm)
	Max 1-5/8" (41mm)
		Min 1/16" (1.6mm)
		Max 1/4" (6mm)
		throat depth
	Closed flap tip should not	at 3/4" (19mm)
		in from edge of
	come closer than
		envelope
	1-3/4" (44mm) to bottom
	of envelope

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT

NOTIFICATION AND ARE SUBJECT TO TEST

SV40221 Rev. A 7-5