5 • Optical Mark Recognition (OMR)
5-12 SV40221 Rev. A
The Benchmark is a mandatory mark and must be either the
first or last mark within the code. The End of Collation Mark is
the only other mandatory mark and so must also be selected,
but it can be placed anywhere within the code. If either of the
mandatory marks are not selected, the Finish screen key will not
be activated.
After all the required marks have been entered, select the Finish
screen key.
You will now be asked to name the OMR code. Once the name
of the code has been entered correctly, select the Save screen
key to save the code within the machine’s memory.
TIPS:
The representation of the OMR mark on the left hand
side of the screen will display as a dashed line if the
‘Absent’ option is selected.
Up to 9 characters can be used to name an OMR code.
10 codes can be stored in the machine’s memory.
All codes to be saved must be named.
No two codes can have the same name.
SV40221 Rev A book.indb 5-12 9/14/2004 5:51:19 PM