Operator Functions • 3
4.Set the blue separator shield lever to the letter required.
5.Take the stack of inserts and fan it to ensure individual Inserts are not stuck together.
6. ‘Shingle’ the inserts to be run so that they look like the photograph on the right and place them onto the feed deck.
The Mail Piece Icon Tree will show the correct orientation of the Inserts.
7.Let the Wedge slide down behind the stack so that the Inserts are supported.
Note: If Insert Feeders F and G are linked (running the same inserts), make sure the lever settings in steps 3 and 4 are set the same on both feeders.
SV40221 Rev. A |
