Troubleshooting • 6
Access to the Removeable Paper Path (under Insert Feeder F)
This removeable plate is located immediately below Insert Feeder F. Therefore, before access can be gained to a material stall in this area, Insert Tray F must be removed as described on page
Access can be gained by lifting the blue handle and then pulling the plate outwards.
When refitting the plate, make sure it is fully latched into position.
Access to the Top Cover (Sheet Feed Area)
Access can be gained to this area by unlatching the blue handle on the Top Cover and raising the cover.
When closing the cover, make sure it is fully latched into position.
SV40221 Rev. A |
