Q-Logic SANBOX2-64 manual Command Line Interface Set Config Command

B – Command Line Interface		￿
Set Config Command
	Table B-7. Set Config Port Parameters (Continued)
	Parameter	Description
	ISLSecurity	E_Port security. Determines which switches a
		port will establish a link with.
		■ Any - link with any FC-SW-2 compliant
		switch.
		■ Ours - link only with an FC-SW-2 compliant
		QLogic switch.
		■ None - reject the link.
	SymbolicPortName	Descriptive name
	ALFairness	Arbitration loop fairness. Enables (True) or
		disables (False) the switch’s priority to arbitrate
		on the loop.
	ARB_FF	Use ARB_FF instead of idles on loop FCAL
		option
	InteropCredit	Interoperability credit. The number of buffer-to-
		buffer credits per port. 0 means the default (12)
		is unchanged.
	ExtCredit	Extended credits. The number of port buffer
		credits that this port can acquire from donor
		ports.
	FANEnable	Fabric address notification. Enables (True) or
		disables (False) the communication of the
		FL_Port address, port name, and node name to
		the logged-in NL_Port.
	LCFEnable	Link control frame preference, R_CTL = 0xC
	MFSEnable	Multi-Frame Sequence bundling
	MFS_TOV	MFS limit for camp on
	MSEnable	Management Server enable on this port
	NoClose	Don't close unless another device arbitrates
	I/O Stream Guard	Enables or disables the suppression of RSCN
		messages
	VIEnable	Enable VI preference routing
	CheckAlps	Close before sending frames to new target

B-28 59043-01 A