Q-Logic SANBOX2-64 manual Slot slotnumber, Steering domainid

￿	B – Command Line Interface
	Show Command

slot [slot_number]

Displays the hardware attributes for the slot on a SANbox2-64 switch given by [slot_number]. [slot_number] can be 0–10. If you omit [slot_number], the hardware configuration for all slots is displayed.

steering [domain_id]

Displays the routes that data takes to the switch given by [domain_id]. If you omit [domain_id], the system displays routes for all switches in the fabric.

support

Executes a series of commands that display a complete description of the switch, its configuration, and operation. The display can be captured from the screen and used for diagnosing problems. This keyword is intended for use at the request of your authorized maintenance provider. The commands that are executed include the following:

■Date

■Alias List

■Config List

■Date

■History

■Ps

■Show (About, Alarm, Backtrace, Chassis, Config Port, Config Switch, Dev, Dev Settings, Domains, Donor, Fabric, Log, Log Settings, Lsdb, Mem, Ns, Perf, Port, Setup Mfg, Setup Snmp, Setup System, Steering, Switch, Topology, Users)

■Uptime

■User Accounts

■Whoami

■Zoneset (Active, List)

■Zoning (History, Limits, List)

switch

Displays switch operational information.

topology

Displays all connected devices.

users

Displays a list of logged-in users. This is equivalent to the User List command.

version

Displays an introductory set of information about operational attributes of the switch. This keyword is equivalent to the About keyword.

59043-01 A B-49