Q-Logic SANBOX2-64 manual Config Command, Syntax config, Keywords activate config, Edit config

￿	B – Command Line Interface
	Config Command

Config Command

Manages the Fibre Channel configurations on a switch. For information about setting the port and switch configurations, refer to the ”Set Config Command” on page B-27.

Authority Admin for all keywords except List

Syntax config

activate [config] backup cancel

copy [config_source] [config_destination] delete [config]

edit [config] list restore save [config]

Keywords activate [config]

Activates the configuration given by [config]. If you omit the configuration, the currently active configuration is used. Only one configuration can be active at a time.

backup

Creates a file named configdata, which contains the system configuration information. To download this file, open an FTP session, log in with account name/ password of “images” for both, and type “get configdata”.

cancel

Terminates the current configuration edit session without saving changes that were made.

copy [config_source] [config_destination]

Copies the configuration given by [config_source] to the configuration given by [config_destination]. The switch supports up to 10 configurations including the default configuration.

delete [config]

Deletes the specified configuration file where [config] is a file name.

edit [config]

Opens an edit session for the configuration given by [config]. If you omit the configuration name, the currently active configuration is used.

list

Displays a list of all available configurations. This keyword is available with User authority.

59043-01 A B-7