SANbox2 Installation Disk Windows Installation | Q-Logic SANBOX2-64

	4 – Installation
	Installing a Switch

4.2.9

SANbox2 Installation Disk - Windows Installation

To install the SANbox Manager application on Windows from the SANbox2 Installation Disk, do the following:

1.Close all programs currently running, and insert the SANbox2 Installation Disk into the management workstation CD-ROM drive.

2.Using Windows Explorer, double-click the drive letter which contains the SANbox2 Installation Disk.

3.Double click the SANbox_Manager folder, then double click the Windows folder.

4.Double click the executable file and follow the SANbox Manager installation instructions.

4.2.10

SANbox2 Installation Disk - Linux Installation

To install the SANbox Manager application on Linux from the SANbox2 Installation Disk, do the following:

1.Close all programs currently running, and insert the SANbox2 Installation Disk into the management workstation CD-ROM drive.

2.Open the File Manager and double-click on the CD-ROM icon.

3.Double click the SANbox_Manager folder, then double click the Linux folder.

4.Double click the executable file and follow the SANbox Manager installation instructions.

4.2.11

SANbox2 Installation Disk - Solaris Installation

To install the SANbox Manager application on Solaris from the SANbox2 Installation Disk, do the following:

1.Close all programs currently running, and insert the SANbox2 Installation Disk into the management workstation CD-ROM drive.

2.Open a terminal window. If the disk isn’t already mounted, enter the following command:

mount /mnt/cdrom

3.Move the directory on the disk that contains the executable. Enter the following command:

cd cdrom/cdrom0/sanbox~1/solaris

4.Run the executable and follow the SANbox Manager installation instructions. Enter the following command:

pkgadd -d sol_pkg

59043-01 A

4-13

Image 59

Q-Logic SANBOX2-64 manual SANbox2 Installation Disk Windows Installation, SANbox2 Installation Disk Linux Installation

Contents

SANbox2-64 Fibre Channel Switch Installation Guide Document Revision History SANbox2-64 Fibre Channel Switch Installation Guide Table of Contents Virtual Private Fabric Hard Zones Section InstallationSection Planning Section Diagnostics/Troubleshooting Appendix B Command Line Interface Section Removal/ReplacementAppendix a Specifications Glossary Index SANbox2-6464-Port Fibre Channel Switch Tables Intended Audience Introduction Related Materials Sicherheitshinweise Safety Notices Federal Communications Commission FCC Class a Statement Communications Statements CE Statement Bsmi Class a Statement Vcci Class a Statement Electrostatic Discharge Sensitivity Esds Precautions Laser Safety Information Zugä ngliche Teile Accessible PartsPiè ces Accessibles Contact Information Technical SupportAvailability Training Introduction Technical Support 59043-01 a General Description Chassis Hardware SANbox2-64 64-Port Fibre Channel Switch Slot and Fibre Channel Port Numbering Chassis Controls and Leds Chassis Controls and LEDs Placing the Switch in Maintenance Mode Maintenance ButtonResetting a Switch Heartbeat LED Amber Input Power LED GreenChassis LEDs Fibre Channel Ports Over Temperature LED AmberFan Fail LED Amber Port Status LED Small Form-Factor Pluggable SFP Transceivers Fabric Ports Port Modes Expansion Port Translated Loop Port Ethernet Port Ethernet Port Serial Port Pin Identification Serial Port Power Supply Components Power Supply Modules 10. Fans Fans Switch Management General Description Switch Management 59043-01 a Public and Private Devices Redundancy and Latency Single Switch Fabric with Initiators and Targets Dual Switch Fabric with Initiators and Targets Domain ID, Principal Priority, and Domain ID Lock Multiple Chassis Fabrics Common Topologies Distance Performance Port-to-Port Latency BandwidthLatency Port-to-Port Transmission Combinations Device Access Soft Zone Access Control List Hard Zone Fabric Management Virtual Private Fabric Hard Zones Fabric Security Planning Fabric Security 59043-01 a Management Workstation Requirements Switch Power RequirementsSite Requirements Fabric Management Workstation Environmental Conditions Installing a Switch Mount the Switch SANbox2-64 Rail Kit Connect the Switch to AC Power Install SFP Transceivers Warnung Ethernet and Serial Cable Connections Connect the Management Workstation to the Switch Serial Connection Ethernet Connection Enter the following command at the Solaris prompt Installing SANbox Manager SANsurfer Management Suite Disk Windows Installation Enter the following command SANsurfer Management Suite Disk Linux Installation Press the Enter key Enter the following command SANsurfer Management Suite Disk Solaris Installation SANbox2 Installation Disk Solaris Installation SANbox2 Installation Disk Windows InstallationSANbox2 Installation Disk Linux Installation Configure the Switch Cable Devices to the Switch Configure the Ports Using SANbox Manager to Install Firmware Install Firmware Enter the following command to install the new firmware Using the CLI to Install Firmware Close the FTP session Using FTP and the CLI to Install Firmware Powering Down a Switch Installation Powering Down a Switch 59043-01 a Normal all pass Post DiagnosticsHeartbeat LED Blink Patterns Internal Firmware Failure Blink Pattern Maintenance Mode PatternFatal Error Blink Pattern Configuration File System Error Blink Pattern Diagnostics/Troubleshooting Restore the configuration file Port Status LED Indications Logging Error EPort Isolation Excessive Port Errors Diagnostics/Troubleshooting Post Diagnostics Chassis and Power Supply LEDs Chassis Diagnostics Fan Fail LED is Illuminated Over Temperature LED is IlluminatedInput Power LED Is Extinguished Power Supply Fault LED is Illuminated Output Power LED Is Extinguished Recovering a Switch Maintenance Image Unpack Maintenance Exit Maintenance Remove Switch Config Maintenance Reset Network ConfigMaintenance Reset Password File Maintenance Copy Log Files SFP Transceivers Marginal Operating Configurations CPU Module Removing the CPU Module Removing the CPU Module Installing the CPU Module Ftp put imagefile Blades Choose the slot number 6 for example Choose the Replace task Removing an I/O Blade To install a new I/O blade, enter y Removal/Replacement Blades CC Blade Slots Cross-Connect Blades Removing a CC Blade Switch Cover Removal Installing a CC Blade Installing a CC Blade Removal/Replacement Removing a Power Supply Module Removing a Power Supply Module Installing a Power Supply Module Removing a Fan Removing a Fan Installing a Fan Removal/Replacement Fans 59043-01 a Fibre Channel Element MIB RFC FC-GS-3FC-Tape FC-SW-2 Maintainability Electrical Dimensions Regulatory Certifications Environmental Shortwave Laser SFP 1G/2G multi-mode Longwave Laser SFP 1G/2G single-mode Logging On to a Switch Command Line Interface Command Syntax Table B-1. Commands Listed by Authority Level Commands Keywords Admin CommandAuthority Syntax Authority Admin Syntax alias Alias Command Rename aliasold aliasnew Members aliasRemove alias members Edit config Config CommandSyntax config Keywords activate config Save config Restore Keywords MMDDhhmmCCYY Date CommandSyntax date Currently active version Fallback CommandFollowing is an example of the Fallback command Fallback Keyword Help CommandHelp command keyword Command History History CommandUser Hotswap Hotswap Command Command Line Interface Hotswap Command Unpack file Image CommandAuthority Admin Syntax image cleanup Keywords cleanup Portnumber Lip CommandLip portnumber Accountname Passwd CommandPasswd accountname Displays current system process information Ps CommandExamples The following is an example of the Ps command Authority User Syntax ps Syntax quit, exit, or logout Quit CommandAuthority User Closes the Telnet session Config configname Reset CommandAuthority Admin Syntax reset Zoning Table B-2. Switch Configuration DefaultsTable B-3. Port Configuration Defaults Table B-4. Alarm Threshold Configuration Defaults Table B-5. Snmp Configuration Defaults Table B-6. System Configuration Defaults Syntax set Set Command Pagebreak state Setup optionSwitch state Log option Port portnumber Set Config CommandTable B-7. Set Config Port Parameters Keywords blade slotnumber Command Line Interface Set Config Command Table B-8. Set Config Switch Parameters Threshold Table B-9. Set Config Threshold Parameters With formatting and current values will follow Table B-10. Set Config Zoning Parameters Mfstov Following is an example of the Set Config Port command Following is an example of the Set Config Zoning command Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Clear Set Log CommandSet log Archive Save Level levelPort portlist Level keyword to Info at the same time Set Log Stop commandStop Stops logging of events Authority Admin Set Port Command State state Snmp System Set Setup CommandSet setup Table B-11. Snmp Configuration Settings Table B-11. Snmp Configuration Settings Table B-12. System Configuration Settings Values will follow System Following is an example of the Set Setup System command Blade Show CommandAlarm Keywords about Ns option Log option Table B-13. Show Port Parameters PagebreakPanel Perf option LIP Alpd Alps Post log Steering domainid Slot slotnumber Following is an example of the Show Chassis command Following is an example of the Show Panel command Following is an example of the Show Fabric command Following is an example of the Show Slot command Following is an example of the Show Port command CPU-0 Following is an example of the Show Switch command SANbox2-64 N108 # show topology Blade slotnumber Show Config CommandShow config Following is an example of the Show Config Zoning command Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Keywords component Show Log Command Following is an example of the Show Log command Following is an example of the Show Log Options commandFollowing is an example of the Show Log Port command Show Perf Command SANbox2-64 N108 # show perf byte Mfg Show Setup CommandShow setup Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Syntax shutdown Shutdown Command Blade slotnumber Test CommandAuthority Admin Syntax test Keywords port portnumber testtype Test x external Command Line Interface Test Command Authority User Syntax uptime Uptime CommandExamples The following is an example of the Uptime command Delete accountname User CommandAccounts Add Following is an example of the User List command Following is an example of the User Add commandFollowing is an example of the User Delete command Authority User Syntax whoami Whoami CommandExamples The following is an example of the Whoami command Syntax zone Zone Command Type zone zonetype Members zoneRemove zone members Rename zoneold zonenew Command Line Interface Following is an example of the Zone Zonesets command Following is an example of the Zone Members command Syntax zoneset Zoneset Command Zones zoneset Delete zonesetRemove zoneset zonelist Rename zonesetold zonesetnew Opens a Zoning Edit session Zoning CommandKeywords active Edit Following is an example of the Zoning List command Command Line Interface Command Line Interface Zoning Command 59043-01 a Fabric Management Switch BootPClass 2 Service Class 3 Service Power On Self Test Post Input Power LEDOutput Power LED Over Temperature LED Worldwide Name WWN Small Form FactorSmall Form-Factor Pluggable TargetPage Index Index-2 59043-01 a LED Index-4 59043-01 a 59043-01 a Index-5 Index-6 59043-01 a