B – Command Line Interface | |
Show Command |
pagebreak
Displays the current pagebreak setting. The pagebreak setting limits the display of information to 20 lines (On) or allows the continuous display of information without a break (Off).
panel
Displays the hardware configuration and port mapping for a
perf [option]
Displays performance information for all ports. Refer to the ”Show Perf Command” on page
port [port_number]
Displays operational information for the port given by [port_number]. Ports are numbered beginning with 0. If the port number is omitted, information is displayed for all ports. Table
Table B-13. Show Port Parameters
Entry | Description |
|
|
AIinit | Incremented each time the port begins AL |
| initialization. |
AIinitError | Number of times the port entered |
| initialization and the initialization failed. |
ClassXFramesIn | Number of class x frames received by this |
| port. |
ClassXFramesOut | Number of class x frames sent by this port. |
ClassXWordsIn | Number of class x words received by this |
| port. |
ClassXWordsOut | Number of class x words sent by this port. |
DecodeError | Decoding error detected. |
FBusy | Number of times the switch sent a F_BSY |
| because Class 2 frame could not be |
| delivered within ED_TOV time. Number of |
| class 2 and class 3 fabric busy (F_BSY) |
| frames generated by this port in response |
| to incoming frames. This usually indicates |
| a busy condition on the fabric or N_Port |
| that is preventing delivery of this frame. |
Flowerrors | Received a frame when there were no |
| available credits. |
|
|
