Q-Logic SANBOX2-64 manual Table B-8. Set Config Switch Parameters

￿	B – Command Line Interface
	Set Config Command

switch

Initiates an editing session in which to change switch configuration settings. The system displays each parameter one line at a time and prompts you for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets.

Table B-8. Set Config Switch Parameters

Parameter	Description
AdminState	Switch administrative state: online, offline, or
	diagnostics
BroadcastEnabled	Enables (True) or disables (False)) forwarding of
	broadcast frames.
InbandEnabled	Enables (True) or disables (False) the ability to
	manage the switch over an ISL.
DefaultDomainID	Default domain ID setting
DomainIDLock	Prevents (True) or allows (False) dynamic
	reassignment of the domain ID.
SymbolicName	Descriptive name
R_T_TOV	Receiver Transmitter Timeout Value. Specifies the
	number of milliseconds a port is to wait to receive a
	response from another port. The default is 100.
R_A_TOV	Resource Allocation Timeout Value. The number of
	milliseconds the switch waits to allow two ports to
	allocate enough resources to establish a link. The
	default is 10000.
E_D_TOV	Error Detect Timeout Value. The number of
	milliseconds a port is to wait for errors to clear. The
	default is 2000.
FS_TOV	Fabric Stability Timeout Value. The default is 5000
	msec.
DS_TOV	Distributed Services Timeout Value (Management
	Server, Name Server). The default is 5000 msec.
PrincipalPriority	The priority used in the FC-SW-2 principal switch
	selection algorithm. 1 is high, 255 is low.
ConfigDescription	The name for the configuration. The default is
	undefined.

59043-01 A B-29