6 – Removal/Replacement | |
CPU Module |
8.Load the image file on the switch. Move to the directory that contains the firmware image file and open an FTP session. When prompted, enter the account name (images) and password (images). Enter the Put command and specify the name of the image file.
ftp 10.0.0.1 User: images Password: images ftp> binary
ftp> put image_file
ftp> bye
9.Unpack the image file. Press and hold the Maintenance button for four seconds to place the switch in maintenance mode. Open a Telnet session and log in with the account name “prom” and password “prom”.
Telnet 10.0.0.1
Sanbox2 login: prom
Password: prom
10.Select option 1 from the maintenance menu. When prompted for a file name enter the firmware image file name. After the unpacking is complete, select option 7 to reset the switch.
0)Exit
1)Image Unpack
2)Reset Network Config
3)Reset Password File
4)Copy Log Files
5)Remove Switch Config
6)Remake Filesystem
7)Reset Switch
Option:1
Image filename: image_file
Unpacking ’filename’, please wait...
Unpackage successful.
0)Exit
1)Image Unpack
2)Reset Network Config
3)Reset Password File
4)Copy Log Files
5)Remove Switch Config
6)Remake Filesystem
7)Reset Switch
Option:7
